Manual

CONTINUED
By inserting a nger or an appropriately sized hex key into
the rear of the marker body SEE PREVIOUS PAGE FIGURE
11.4
, hook onto one of the holes in the Can and extract it
from the marker body SEE FIGURE 11.6.
You should now have removed the following parts from
the marker body: the Can (A), the Bolt (B) and the Prop
Shaft (C)
SEE FIGURE 11.7.
Take the Can and having cleaned o any old grease, paint
or debris, apply a small amount of Eclipse Grease to the
internal o-ring and the 2 external o-rings
SEE FIGURE
11.8.
1
Smear a light coat of Eclipse Grease onto the smooth
internal bore of the Can from the rear SEE FIGURE 11.9.
1
Remove any excess blobs of eclipse grease from the inside and
outside of the can.
A
B
C
FIG 11.7
FIG 11.6
FIG 11.9
FIG 11.8
52.
MAINTENANCE