User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-114-
15. In the AP-1, go to the “Status-> Wireless Client List” page to check the client’s signal strength.
16. Use command line tool to ping each other to ensure the link is successfully established.
For example, from Site-1, ping 192.168.1.200; and at Site-2, ping 192.168.1.100.