User's Manual

User Manual of WAP-200N/WBS-200N
-11-
1.4 Product Specifications
Product
WAP-200N
WBS-200N
2.4GHz 300Mbps 802.11n Outdoor Wireless AP/CPE
Hardware Features
Standard Support
IEEE802.11b/g/n
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Memory
64 Mbytes DDR SDRAM
16 Mbytes Flash
PoE
Passive PoE
Interface
Wireless IEEE 802.11b/g/n, 2T2R
PoE LAN (LAN 1): 1 x 10/100BASE-TX, auto-MDI/MDIX, 24V passive PoE In
LAN 2: 1 x 10/100BASE-TX, auto-MDI/MDIX
Button
Reset button
LED
PWR, LAN, WLAN, Signal Strength
Dimensions (W x D x H)
100 x 29 x 186mm (without antennas)
100 x 29 x 380mm (with antennas)
100 x 29 x 186mm
Weight
300g (without antennas)
332g (with antennas)
300g
Power Consumption
Maximum 7.2W
Power Requirements
LAN1
 24V DC, 0.6A (Passive PoE)
 Pin 4, 5 V DC+
 Pin 7, 8 V DC-
Mounting Type
Mast, wall mount
Wireless Interface Specifications
Antenna
Built-in 5dBi detachable
omnidirectional antennas with RP-
SMA
connectors
HPBW Horizontal: 360 degrees
HPBW Vertical: 30 degrees
Built-
in 8dBi directional antenna with dual
polarization
[Port1]
HPBW Horizontal: 78 degrees
HPBW Vertical: 45 degrees
[Port2]
HPBW Horizontal: 54 degrees
HPBW Vertical: 59 degrees
Data Rate
IEEE 802.11b: 1, 2, 5.5, 11Mbps
IEEE 802.11g: up to 54Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps