User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-28-
Figure 5-1 Operation Mode – All
The page includes the following settings:
Object Description
• Device Name
Enter a name for the device (1-32 characters). The name you type
appears in SNMP management. This name is not the SSID and is not
broadcast to other devices.
• Operation Mode
Use the radio button to select an operation mode.
• Save & Apply
Click Save & Apply to save changes.
• Cancel
Click Cancel to cancel the unsaved changes and revert to the previous
settings.