User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-46-
Step 4. Click the check box of the preferred BSSID and configure the encryption to be the same as the root AP.
The Repeater SSID can be modified to an easily-recognized name for wireless clients. Then, click “Accept” to
save the configurations.
Step 5. Go to the “Status-> Save/Reload” page to save and apply settings.