User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-52-
5.2.4 WDS Link List
Click “Status WDS Link List” to view the current WDS link client.
The WDS Link List is only available in WDS Bridge mode.
Figure 5-16 WDS Link Status
The page includes the following settings:
Object Description
• WDS Link ID
The sequence number of the WDS link.
• MAC Address
The MAC Address of the associated remote node.
• Link Status
The current link status.
• RSSI (dBm)
The current signal strength of the associated remote node.
• Refresh
Click Refresh to update the current list.
5.2.5 DHCP Client Table
Click “Status DHCP Client Table” to view the current DHCP client.
The DHCP Client Table is only available in Client Router (WISP) mode.
Figure 5-17 DHCP Client List
The page includes the following settings:
Object Description
• MAC Address
The MAC Address of the DHCP client.
• IP
The IP assigned to the DHCP client.
• Host Name
The Host Name of the DHCP client.
• Expires
The Expiry time of the DHCP client.