User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-58-
• Ending IP Address
Specify the ending IP address for the DHCP range.
• WINS Server IP
Enter the IP address of the WINS server.
• Accept
Click Accept to apply the setting.
• Cancel
Click Cancel to cancel the setting.
5.4.2 WAN Settings
Go to the “Operation Mode” page to configure the device as “Client Router” and then go to “Router WAN
Settings” to configure the device’s WAN settings in client router mode. The WAN settings should be provided by
the ISP.
Figure 5-23 WAN Settings – All
The page includes the following common settings in each Internet Connection Type:
Object Description
• Internet Connection Type
• DHCP: Dynamic IP addressing assigns a different IP address each
time a device connects to an ISP service provider.
• Static IP: Setting a static IP address allows an administrator to set a
specific IP address for the router and guarantees that it cannot be