User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-60-
Figure 5-24 WAN Settings – DHCP
The page includes the following specific settings in DHCP type:
Object Description
• Account Name (if required)
Enter the account name provided by your ISP.
• Domain Name (if required)
Enter the domain name provided by your ISP.
• MTU
The maximum transmission unit (MTU) specifies the largest packet size
permitted for an internet transmission. The factory default MTU size for
DHCP is 1500. The MTU size can be set between 576 and 1500.
• Accept
Click Accept to apply the setting.
• Cancel
Click Cancel to cancel the setting.
5.4.2.2. Static IP
If your ISP offers you static IP Internet connection type, select Static IP and then enter IP address, subnet mask,
primary DNS and secondary DNS information provided by ISP in the corresponding fields.