User's Manual

User Manual of WAP-200N/WBS-200N
-69-
The page includes the following settings:
Object Description
• Wireless Mode
Wireless mode supports 802.11b/g/n mixed modes.
• Channel HT Mode
The default channel bandwidth is 20/40MHz. The larger the channel, the
better the transmission quality and speed.
• Extension Channel
Select upper or lower channel. Your selection may affect the Auto channel
function.
• Channel / Frequency
Select the channel and frequency appropriate you’re your country’s
regulation.
• Auto
Check this option to enable auto-channel selection.
• AP Detection
AP Detection can select the best channel to use by scanning nearby
areas for Access Points.
• Current Profile
Configure up to four different SSIDs. If many client devices will be
accessing the network, you can arrange the devices into SSID groups.
Click Edit to configure the profile and check whether you want to enable
extra SSIDs.
SSID Profile
• SSID
Specify the SSID for the current profile.
• VLAN ID
Specify the VLAN tag for the current profile.
• Suppressed SSID
Check this option to hide the SSID from clients. If checked, the SSID will
not appear in the site survey.
• Station Separation
Click the appropriate radio button to allow or prevent communication
between client devices.
• Wireless Security
Refer to section
5.5.3 Security Setting.
• Save
Click Save to save changes.
• Cancel
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
In the CB/WDS STA/CR/Repeater mode, select Security Mode on the “Wireless Network” page to configure
the wireless security to be the same as the root AP’s security settings.