User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-88-
5.6.5 Auto Reboot Settings
Click “Management Auto Reboot Settings” and the following page will be displayed.
This page allows you to enable and configure system auto reboot interval. The device can regularly reboot
according to the frequency in different time formats of interval.
Figure 5-52 Auto Reboot Settings
The page includes the following settings:
Object Description
• Auto Reboot Settings
Select Enable from the drop-down menu to setup this function.
• Frequency of Auto Reboot
Select the frequency interval using the drop-down menus. The interval
supported in different time formats:
• Min: 10/20/30/40/50/60 Mins
• Hour: 1~24 hours
• Day: 1~31 days
• Week: 1~5 weeks
• Save/Apply
Click Save/Apply to apply all changes.
• Cancel
Click Cancel to cancel the settings.
5.6.6 Firmware Upgrade
Click “Management Firmware Upgrade” to upgrade the device’s firmware.
Figure 5-53 Firmware Upgrade