User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-90-
Step 4. When the upgrade is finished, the system will auto reboot and you can click the hyperlink “Click here
when AP is ready” after the system restarts.
5.6.7 Time Settings
Click “Management Time Settings” to configure time zone and NTP server settings to be in sync with the
device’s time.
Figure 5-54 Time Settings
The page includes the following settings:
Object Description
• Manually Set Date and Time
Enter the date and time values in the date and time fields or click the
Synchronize with PC to get the date and time values from the
administrator’s PC.
• Automatically Get Date and
Time
Select a time zone from the drop-down list and check whether you want to
enter the IP address of an NTP server or use the default NTP server.
• Enable Daylight Saving
Click to enable or disable daylight savings time. Select the start and stop
times from the Start Time and Stop Time dropdown lists.
• Save/Apply
Click Save/Apply to apply all changes.
• Cancel
Click Cancel to cancel the settings.