User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Appendix A: Troubleshooting
- Appendix B: Use Planet Smart Discovery to find AP
- Appendix C: FAQ
User Manual of WAP-200N/WBS-200N
-98-
Appendix C: FAQ
Q1: How to set up the AP Client Connection
Topology:
1. Use static IP in the PCs that are connected with AP-1 (Site-1) and AP-2 (Site-2). In this case, Site-1 is
“192.168.1.100”, and Site-2 is “192.168.1.200”.
2. In the AP-1, go to “System-> IP Settings” to configure the IP address to static and different from the CPE.