User's Manual

Figure
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
firewall software programs may block a DHCP request on newly installed adapters.
3.2 Starting Setup in
the
I
t is easy to configure and manage the
Step 1.
To access the configuration
http://192.168.1.253 in the
web
Figure
After a moment, a login window will appear
letters. Then click the OK
button or press the
User
Manual of
-21-
Figure
3-4 Failed result of Ping command
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
firewall software programs may block a DHCP request on newly installed adapters.
the
Web UI
t is easy to configure and manage the
WBS-502AC with the web browser.
To access the configuration
page, open a web browser and enter
web
address field of the browser.
Figure
3-5 Login by default IP address
After a moment, a login window will appear
. Enter admin
for the User Name and Password, both in lower case
button or press the
Enter key.
Figure 3-6 Login Window
Manual of
WBS-502AC
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
AP. Some
the default IP address
for the User Name and Password, both in lower case