User's Manual

4.4.2.4.
PPTP
Select PPTP if ISP is using a PPTP
connection
The page includes the following specific settings in PPTP type
Object
Description
MTU
The maximum transmission unit (MTU)
permitted for an
PPTP
IP Address
Enter the
Subnet Mask
Enter the
Default Gateway
Enter the
PPTP Server
Enter the IP address of the PPTP
Username
Enter the username
Password
Enter the password
Connect on Demand
Select
disconnect when it reach
automatically connect when user tries to access the network.
Keep Alive
Select whether to keep the Internet connection always on, or enter a
redial
User
Manual of
-38-
connection
.
Figure 4-17 WAN Settings – PPTP
The page includes the following specific settings in PPTP type
:
Description
The maximum transmission unit (MTU)
specifies the largest packet size
permitted for an
internet transmission. The factory default MTU size
PPTP
is 1400. The MTU size can be set
between
Enter the
device’s WAN IP address
provided by ISP
Enter the
device’s WAN IP
Enter the
device’s WAN Gateway IP
provided by ISP
Enter the IP address of the PPTP
server.
Enter the username
provided by ISP.
Enter the password
provided by ISP.
Select
it to specify the
maximum idle time. Internet connection
disconnect when it reach
es the maximum idle
time, but it will
automatically connect when user tries to access the network.
Select whether to keep the Internet connection always on, or enter a
redial
period once the internet loses connection.
Manual of
WBS-502AC
specifies the largest packet size
internet transmission. The factory default MTU size
for
between
1200 and 1400.
provided by ISP
.
subnet mask provided by ISP
.
provided by ISP
.
maximum idle time. Internet connection
will
time, but it will
automatically connect when user tries to access the network.
Select whether to keep the Internet connection always on, or enter a