User's Manual

Wireless Profile Settings
(Security, MAC ACL, Wireless Traffic Shaping)
Security Mode
Select the suitable security mode from the drop
wireless network.
WPA2
WPA2
ACL Mode
Determines whether network access is granted or denied to clients whose
MAC addresses appear in the MAC Address
option includes
MAC Address
Displays
device.
Add
Enter the
and then c
Enable Traffic Shaping
Enable or disable the regulation of
improved QoS.
Download Limit
Sp
Upload Limit
Sp
Save
Click
In the CB/WDS STA/CR mode, click
Scan
configure the wireless
profile settings as following page.
Figure 4
-
After click Save, the wireless configuration can be observed
User
Manual of
-45-
(Security, MAC ACL, Wireless Traffic Shaping)
Select the suitable security mode from the drop
-
down list to encrypt the
wireless network.
The options include
Disabled, WEP, WPA
WPA2
-PSK, WPA-
PSK Mixed, WPA, WPA2, and WPA Mixed
WPA2
-PSK mode is strongly recommended.
Determines whether network access is granted or denied to clients whose
MAC addresses appear in the MAC Address
table on this page.
option includes
Disable, Deny MAC in the list, or Allow MAC
Displays
the MAC Address that will be
denied/allowed
device.
Enter the
wireless MAC address of the client in front of the
and then c
lick Add to
add the new entry to the MAC filtering list.
Enable or disable the regulation of
packet flow leaving an interface for
improved QoS.
Sp
ecify the wireless transmission
speed used for downloading.
Sp
ecify the wireless transmission
speed used for uploading.
Click
Save to save changes.
Scan
in the “AP Detection” field to
associate to the AP. Then, you can
profile settings as following page.
-
26 Wireless Profile – CB/WDS STA/CR Mode
After click Save, the wireless configuration can be observed
in the
Wireless Settings
Manual of
WBS-502AC
down list to encrypt the
Disabled, WEP, WPA
-PSK,
PSK Mixed, WPA, WPA2, and WPA Mixed
. The latest
Determines whether network access is granted or denied to clients whose
table on this page.
The
Disable, Deny MAC in the list, or Allow MAC
in the list.
denied/allowed
access to this
wireless MAC address of the client in front of the
Add button
add the new entry to the MAC filtering list.
packet flow leaving an interface for
speed used for downloading.
speed used for uploading.
associate to the AP. Then, you can
Wireless Settings
– 5GHz section.