User's Manual

Figure
4
The page includes the following settings
Object
Description
• Security
Select the type of WDS
• WEP Key
Enter the WEP key if security
• AES Passphrase
Enter the AES
• ID
Displays
In
In the WDS Bridge mode, up to 8 nodes can be configured to use WDS
link.
• MAC Address
Enter the
wireless connectivity.
• Mode
Select Disable or Enable to
• Save
Click
NOTE:
1.
The WDS link settings is only available in
through wireless MAC address each other by using non
compatible with other brand
2.
The security setting in each site of WDS link must be
3.
The wireless channel must be fixed and must be the same in each site of WDS link.
4.5.3 Security Settings
Go to the “Network

Wireless”
page to configure the
User
Manual of
-47-
4
-29 WDS Link Settings – WDS Bridge Mode
The page includes the following settings
:
Description
Select the type of WDS
security: None, WEP, or AES.
Enter the WEP key if security
is selected
as WEP.
Enter the AES
passphrase if security is selected
as
Displays
the sequence number of the entries.
In
the WDS AP mode, up to 4 nodes can be configured to use WDS link.
In the WDS Bridge mode, up to 8 nodes can be configured to use WDS
link.
Enter the
wireless MAC address of the AP
to which you want to
wireless connectivity.
Select Disable or Enable to
disable or enable WDS.
Click
Save to save changes.
The WDS link settings is only available in
WDS AP or
WDS Bridge mode and
through wireless MAC address each other by using non
-
standard protocol which may not
compatible with other brand
s or models
. Use the same model for full compatibility
The security setting in each site of WDS link must be
the same.
The wireless channel must be fixed and must be the same in each site of WDS link.
page to configure the
security settings.
Manual of
WBS-502AC
security: None, WEP, or AES.
as WEP.
as
AES.
the WDS AP mode, up to 4 nodes can be configured to use WDS link.
In the WDS Bridge mode, up to 8 nodes can be configured to use WDS
to which you want to
extend
disable or enable WDS.
WDS Bridge mode and
is communicating
standard protocol which may not
be
. Use the same model for full compatibility
as required.
The wireless channel must be fixed and must be the same in each site of WDS link.