User's Manual

4.6 Management
On this page, you can
configure the system
settings, Time settings, Password settings,
Configuration backup and restore
, Factory default, and
4.6.1 Account
(Password Settings)
Click “System Manager
Account
”
Figure
The page includes the following settings
Object
Description
• Administrator Username
Enter a new username for
• Current Password
Enter
• New Password
Enter a new password for logging in to the Web
• Verify Password
Re
• Apply
Click
Remote
Management: WISP mode only
• Remote Management
Click
• Remote Management Port
Enter the remote access port number.
4.6.2 SNMP Settings
SNMP is used in network management systems to monitor network
administrative attention.
User
Manual of
-60-
configure the system
settings for management purpose
, including
settings, Time settings, Password settings,
SNMP settings, CLI settings, Wi-
Fi schedule,
, Factory default, and
Auto reboot.
(Password Settings)
”
to configure
username and password of the login account.
Figure
4-44 Administration (Password Settings)
The page includes the following settings
:
Description
Enter a new username for
logging in to the Web
page.
Enter
the current password.
Enter a new password for logging in to the Web
page.
Re
-enter the new password for confirmation.
Click
Apply to apply all changes.
Management: WISP mode only
Click
Enable to enable remote access through
WAN.
Enter the remote access port number.
SNMP is used in network management systems to monitor network
-
attached devices for
Manual of
WBS-502AC
, including
Management VLAN
Fi schedule,
Firmware upgrade,
username and password of the login account.
page.
page.
WAN.
attached devices for
conditions that warrant