User's Manual

- 17 -
3.2.2 54M AP Utility configuration
After installing utility, you can found the icon on your desktop, please double click this icon
to run the configuration utility and select each option to setup your Access Point as you need. After
settings in each option, please press “Apply” to save. It will show you the dialog box to enter User
Name and Password. By default, the User Name and Password is “admin”.
3.2.2.1 Link Information
When the configuration utility starts, it will show you the first option “Link Information”. You can view
the first Access Point’s current setting.
Note: If you have many WAP-4000, all the WAP-4000s will list in “Available AP”. You can select the
WAP-4000 that you want to check, then you can see the settings of the WAP-4000.