User's Manual

- 20 -
3.2.2.3 IP Settings
Fix IP Address: You may give a fixed IP address to WAP-4000 manually by choosing this radio
button.
IP Address: Set an IP address for the AP.
Subnet mask: Set the Subnet Mask for the AP.
Gateway: The IP address of a gateway device necessary for communication with devices
outside the subnet of the Access Point. If your network is not divided onto different subnets, this
can remain blank.
DHCP Client: If there is a DHCP Server in your LAN, you can select DHCP Client to let the
WAP-4000 be a client to get an IP address from your DHCP server.
DHCP Server: Enable or disable DHCP server function of WAP-4000. When DHCP server is
enabled, you can specify the IP range and DNS server IP fields below.