User's Manual
- 1 -
Chapter 1 Introduction 
Thank you for purchasing WAP-4000. WAP-4000 is an IEEE 802.11g Wireless Access Point. IEEE 
802.11g uses 2.4GHz frequency band, the same as IEEE 802.11b; but it provides more throughput rate 
than 802.11b. The maximum throughput rate of 802.11g can up to 54Mbps. WAP-4000 is also backward 
compatible and interoperable with IEEE 802.11b compliant wireless devices. Except for 64/128bit WEP 
encryption, WAP-4000 also integrates 802.1X authentication. Cooperating with a RADIUS server can 
make your wireless LAN more secure then ever. Provided with one reversed-polarity SMA male 
connector, WAP-4000 is easy to connect external antenna and booster to extend the wireless distance.  
1.1 Package Contents 
Make sure that you have the following items: 
•  One WAP-4000 
•  One AC Power Adapter 
•  One dipole antenna 
•  One User’s Manual and Utility CD 
•  One Quick Installation Guide 
Note:
If any of the above items are missing, contact your supplier as soon as 
possible.
1.2 System Requirements 
Before installation, please check the following requirements with your equipment. 
•  Pentium Based (And Above) IBM-Compatible PC System 
•  CD-ROM drive 
•  Windows 98/ME/2000/XP Operating System with TCP/IP protocol 
1.3 Features 
• Wireless LAN IEEE802.11g and IEEE802.11b compliant 
• Strong network security with 802.1X authentication, and 64/128-bit WEP encryption. 
• One detachable reverse-polarity SMA connectors can connect to external antenna for expanding 
connection distance 
• High speed data transfer rate up to 54Mbps 
• Four operation modes selectable: AP / AP Client / Point to Point / Point to Multipoint   
• Auto Fall-Back Data Rate for Long-Distance Communication and Noisy Environments 
• Features Roaming, Best Access Point Selection, Load Balancing, and Network Traffic Filtering 
• Support 63 clients to connect the network. (For best performance, the suggested maximum clients 
number of one WAP-4000 in AP mode is 25.)  
• Provide Windows-base configuration utility and Web Configuration  
• Support DHCP Server and Client 
• Support MAC Filter  










