User's Manual Modem Router ADE-3100

Chapter 3

This Chapter details the first time login procedure and the Status

screen

ADE-3100 contains an HTTP server. This enables you to connect to it, and config-

ure it, using your Web Browser. Your Browser must have JavaScript support.

The configuration program has been tested on the following browsers:

• Netscape V4.08 or later

• Internet Explorer V4 or later

Moreover, it is suggested to use an Ethernet LAN PC for the initial configuration of

ADE-3100.

Preparation

Before attempting to configure ADE-3100, please ensure that:

• Your PC can establish a physical connection to ADE-3100. The PC and ADE-

3100 must be directly connected (using the LAN port on ADE-3100) or on the

same LAN segment.

• ADE-3100 must be installed and powered ON.

• If ADE-3100's default IP Address (10.0.0.2) is already used by another device,

the other device must be turned OFF until ADE-3100 is allocated a new IP Ad-

dress during configuration.

Connecting to ADE-3100

To establish a connection from your PC to ADE-3100:

1. After installing ADE-3100 in your LAN, start your PC. If your PC is already

running, restart it.

2. Start your WEB browser.

3. In the Address box, enter "HTTP://" and the IP Address of ADE-3100, as in this

example, which uses ADE-3100's default IP Address:

http://10.0.0.2

4. If connection is established, a pop-up password request page will show up. The

default login User Name of ADE-3100 administrator is “admin”, and Password

is “epicrouter”. The default login User Name for non-administrator is “user”,

and Password is “password”.