Quick Guide

– 1 – – 2 –
– 3 – – 4 –
1. Packet Contents
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the items plus CAM-AHD325/
CAM-AHD425. If any item is missing or damaged, please
contact the seller immediately.
Quick installation guide x 1
Hex wrench x 1
(CAM-AHD325 only)
CAM-AHD325 CAM-AHD425
Screw packet for each model x 1
2. Physical Introduction
CAM-AHD325 CAM-AHD425
IR LED
IR LED Sunshield
Video Output
Power Input
OSD Control Button
Connector Description
Power Input Connect to a 12V DC power adapter.
Video Output BNC connector for analog video output.
OSD Control
Button
Description
H AHD Mode
T TVI Mode
C CVI Mode
A CVBS Mode
Press & Direction
Control
OSD Configuration
3. Hardware Installation
1. Place the camera in a suitable location and attach with
screws.
2. Adjust the camera to the correct direction.
3. Connect a 12V DC power adapter to the power input
connector.
4. Connect to the DVR and select your channel. Next, select
required mode via the OSD control button and hold the
button for about 5 seconds to take effect. After that, the
image of camera will be shown on the channel.
5. Press the OSD control button to enter the main menu of
OSD function for conguration
Note
Before connecting the power adapter to the
camera, please make sure the power output
voltage is 12V DC (max. ±5%). If you are not
sure of this part, we suggest you use a 12V
DC switching power adapter. It can provide
stable power output.
3.1 OSD Function
3.2 Setting Steps
1. Exposure
2. Digital Noise Reduction
3. Special Functions
4. Adjust