User Guide

Content Security Gateway User’s Manual

to the network. You can choose to enable LAN, WAN or DMZ interface to allow

send out the RIP protocol in a period of time to update the

0 will cut off the routing automatically until it receives RIP protocol again. The default timer is

80 seconds.

Dynamic Routing (RIPv2)

Enable Dynamic Routing (RIPv2), CS-500 will advertise an IP address pool to the specific network so that the

address pool can be provided

RIP protocol supporting.

Routing information update timer: CS-500 will

routing table, the default timer is 30 seconds.

Routing information timeout: If CS-500 does not receive the RIP protocol from the other router in a period

of time, CS-50

- 21 -