User Guide

Content Security Gateway User’s Manual
To-Appliance Packet Logging
Whe
sou
n the function is selected, the CS-500 will record the packets that contain the IP address of CS-500 in
rce or destination, the records will display in Traffic Log for administrator to inquire about.
Content Security Gateway will be rebooted.
A confirmation pop-up bo . Follow the confirmation pop-up box, click OK to restart Content
Security Gateway or click Cancel to discard changes.
System Reboot
Once this function is enabled, the
Reboot Appliance: Click Reboot.
x will appear
ock
nfigure the Content Security Gateway’s date and time by either syncing to an Internet
s clock.
Step 3. Enter the Server IP Address or Server name with which you want to synchronize.
4.1.5 Date/Time
Synchronizing the Content Security Gateway with the System Cl
Administrator can co
Network Time Server (NTP) or by syncing to your computer’
Follow these steps to sync to an Internet Time Server
Step 1. Enable synchronization by checking the box.
Step 2. Click the down arrow to select the offset time from GMT.
- 22 -