Quick Guide

13
7. Logging on to Console
Once the terminal is connected to the device, power on the GEPON OLT and the
terminal will display “running testing procedures”. Then, the following message
asks to log in user name and password. The factory default user name and
passwordareshownasfollowsandtheloginscreeninFigure7-1appears.
Username:admin
Password:admin
Figure 7-1: OLT Console Login Screen
The user can now enter commands to manage the OLT. For a detailed description
ofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.