Quick Guide

15
4.Repeatstep1tocheckiftheIPaddressischanged.
Store current OLT conguration
5.At the “(cong-if-aux)#” prompt, enter the following command and press
<Enter>.
epon-olt(cong-if-aux)# write
Figure 8-3: Saving Current Conguration Command Screen
If the IP is successfully congured, the OLT will apply the new IP address setting
immediately. You can access the Web interface of the OLT through the new IP
address.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.