8-Port 10/100TX 802.
Copyright Copyright © 2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications.
Table Of Contents 1. Introduction................................................................................................ 5 1.1 Checklist.............................................................................................. 5 1.2 Product Description............................................................................... 5 1.3 Features.............................................................................................. 6 1.4 Specifications.....................................
1. Introduction 1.1 Checklist Check the contents of your package for the following parts: FGSD-1011HP x 1 User’s Manual x 1 Power Cord x 1 Rubber Feet x 4 Rack-mounting Brackets Screws x 8 If any of these pieces are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair. 1.
is more than enough for those network applications with Fast Ethernet speed transmission. The eight 802.3af/at PoE ports feature PoE power injector function which is able to drive 8 IEEE 802.3at compliant powered devices. The FGSD1011HP also offers a simple, costeffective and nonblocking wirespeed performance. It comes with a 9-inch metal compact housing, suitable for desktop deployment in SOHO office or department network application.
Hardware zz 9-inch desktop size, 1U height, mountable zz LED indicators for PoE ready/activity and LINK/ACT zz Fanless design zz Internal AC power supply zz Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) 1.4 Specifications Model FGSD-1011HP Hardware Specifications 10/100Mbps Ports 8 10/100BASE-TX MDI/MDI-X RJ45 ports Gigabit Ports 1 10/100/1000BASE-T MDI/MDI-X RJ45 port SFP Slot 1 100/1000BASE-X SFP/mini-GBIC interface PoE Inject Port 8-port with 802.
Power Consumption 135 watts, 463.2 BTU Dimensions (W x D x H) 220 x 150 x 44 mm Weight 1220 g ESD Protection Contact discharge of ±6KV DC Air discharge of ±8KV DC Surge Immunity ±4KV Power over Ethernet PoE Standard IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span Power Pin Assignment 1/2(+), 3/6(-) PoE Power Output Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at) Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.
2. Hardware Description The switch provides three different running speeds – 10/100/1000Mbps, and automatically distinguishes the speed of the incoming connection. This section describes the hardware features of the FGSD-1011HP. For easier management and control of the FGSD-1011HP, familiarize yourself with its display indicators and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting any network device to the FGSD-1011HP, please read this chapter carefully.
This mode makes the FGSD-1011HP operate as an Extend and VLAN isolation switch and 1. Port 1 to port 8 will isolate respectively 2. Port 1 to port 8 can only communicate with port 9 and port 10 (uplink port). 3. 30-watt PoE transmit distance of 250m at speed of 10Mbps. Standard VLAN Extend Please reboot the FGSD-1011HP after adjusting the DIP switch to take effect.
2.1.1 LED Indicators System LED Color PWR Green Function Lights to indicate that the Switch has power. Per 10/100Mbps Port LED Color Function PoE-in-use Orange Lights to indicate the port is providing 52V DC in-line power. (1-8 ports) Speed/ LNK/ACT Green Lights to indicate the Switch is successfully connecting to the network at 10/100Mbps. Blinks to indicate that the Switch is actively sending or receiving data over that port.
3. Hardware Installation Start up Please refer to the following for your cabling: 10/100BASE-TX All 10/100BASE-TX ports come with Auto-Negotiation capability. They automatically support 100BASE-TX and 10BASE-T networks. Users only need to plug a working network device into one of the 10/100BASE-TX ports, and then turn on the FGSD1011HP. The port will automatically run in 10Mbps, 20Mbps, 100Mbps or 200Mbps after negotiating with the connected device.
3.1 Desktop Installation To install the FGSD-1011HP on desktop, simply follow the following steps: Step 1: Attach the rubber feet to the recessed areas on the bottom of the FGSD1011HP, as shown in Figure 3-1. 2 PoE 2 4 6 8 1 3 5 7 LNK PWR FGSD-1 011HP 4 ACT 6 PoE In-Us PoE 8 8-Port 10/ e 9 10 Gigabit LNK 100TX 802.
Step 5: Supply power to the FGSD-1011HP. A. Connect one end of the power cable to the FGSD-1011HP. B. Connect the power plug of the power cable to a standard wall outlet. When the FGSD-1011HP receives power, the Power LED should remain solid Green. 3.2 Rack Mounting To install the FGSD-1011HP in a 19-inch standard rack, follow the instructions described below. Step 1: Place your FGSD-1011HP on a hard flat surface, with the front panel positioned towards your front side.
Step 5: After the brackets are attached to the FGSD-1011HP, use suitable screws to securely attach the brackets to the rack, as shown in Figure 3-3. 2 PoE 2 4 6 8 1 3 5 7 LNK PWR FGSD-1 011HP 4 ACT 6 PoE In-Use PoE 9 10 Gigabit LNK 8 8-Port 10/100 TX 802.3a t PoE+1 1-Port Gigabit -Port SFP DesktoGigabit+ p Switch ACT 1000 Standard VLAN Extend 1 3 5 7 9 Uplink 10 Figure 3-3: Mounting the FSD-1008HP in a Rack Step 6: Proceed with Steps 4 and 5 of session 3.
150mm FGSD-1011HP Switch Bottom Side 50/60Hz, 1.
4. Troubleshooting This chapter contains information to help you solve issues. If the FGSD-1011HP is not functioning properly, make sure the FGSD-1011HP was set up according to instructions in this manual. Q1: The Link LED is not lit. Solution: Check the cable connection and also try to swap one new cable. Q2: 100BASE-TX port link LED is lit, but the traffic is irregular. Solution: Make sure the attached device is not set to full duplex.
Appendix A - 10/100Mbps, 10/100BASE-TX When connecting the Switch to another Fast Ethernet switch, a straight-through or crossover cable might be necessary. Each port of the Switch supports auto-MDI/ MDI-X detection, meaning you can directly connect the Switch to any Ethernet devices without making a crossover cable.
There are 8 wires on a standard UTP/STP cable and each wire is color-coded.
