Datasheet
3
FGSW-2022VHP
In the Extend operation mode, the FGSW-2022VHP operates on a per-port basis at 10Mbps duplex operation but can provide PoE power output over a
distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSW-2022VHP provides an additional
solution for 802.3at/bt PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent
broadcast storm and defend DHCP spoong in the Extend operation mode.
Flexible Extension Solution
The two mini-GBIC slots built in the FGSW-2022VHP are compatible with the 1000BASE-X SFP (small form-factor pluggable) ber transceiver, uplinked to
the backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode ber) to 10/20/40/80/120 kilometers
(single-mode ber or WDM ber). They are well suited for applications within the enterprise data centers and distributions.
Robust Protection
The FGSW-2022VHP provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge
immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the ow of operation does not uctuate.
Easy Installation and Cable Connection
As data and power are transmitted over one cable, the FGSW-2022VHP does not need a second cable and electrical outlets on the wall, ceiling or any
unreachable place. Thus, it helps to lower the installation costs and simplify the installation effort. All the RJ45 copper interfaces of the FGSW-2022VHP
support 10/100Mbps auto-negotiation for optimal speed detection through RJ45 Cat. 5e/6 cable. It also supports standard auto-MDI/MDI-X that can detect the
type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Extend Mode
Power
250 meters (820 feet)
PoE
LCD PoE Switch
PoE
10BASE-T UTP with PoE
PoE IP Camera
Switch Mode
Options:
VLAN
Extend
Standard>
<UP>/<Do wn>:Se lect
<Enter>: Confir m <Ba ck>:Re turn
Current Settin g: St andard
Standard
VLAN
> Extend