Datasheet

5
FGSW-2511P
Specications
Model
FGSW-2511P
HardwareSpecications
10/100Mbps Ports 24 10/100BASE-TX MDI/MDI-X RJ45 ports
Gigabit Ports 1 10/100/1000BASE-T MDI/MDI-X RJ45 port
SFP Slot 1 1000BASE-X SFP interface, shared with Gigabit RJ45 copper
PoE Inject Port 24-port with 802.3at PoE injector function (Port-1 to Port-24)
LED Display
System:
■Power(Green)
10/100BASE-TX RJ45 Interface:
■LNK/ACT(Green,Port-1toPort-24)
■PoE(Amber,Port-1toPort-24)
10/100/1000BASE-T RJ45 and 1000BASE-X combo Interface:
■LNK/ACT(Green,Port25)
DIP Switch
4 operation modes:
Standard/QoS/VLAN/Extend
PowerRequirements AC 100~240V, 3A max.
Power Consumption 215 watts, 733 BTU
Dimensions (W x D x H) 440 x 200 x 45 mm
Weight 2612g
ESD Protection
Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Surge Immunity ±4KV
SwitchingSpecications
Switch Architecture Store and Forward
MAC Address Table 16K MAC address table with auto learning function
Switch Fabric 6.8Gbps
Switch Throughput 5.06Mpps @64bytes
Maximum Packet Size 16K bytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Output
Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
PoE Power Budget 190 watts
Number of PDs, 7 watts 24
Number of PDs, 15 watts 12
Number of PDs, 30 watts 6
Standard Conformance
EMI Safety CE, FCC
Standard Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
IEEE 802.3z
Ethernet
Fast Ethernet
Gigabit 1000BASE-T
Gigabit SX/LX
Flow Control
Power over Ethernet
Power over Ethernet Plus
EnergyEfcientEthernet
Environment
Operating Environment 0 ~ 50 degrees C
Storage Environment -10 ~ 70 degrees C
Operating Humidity 5 ~ 95%, relative humidity, non-condensing
Storage Humidity
5 ~ 95%, relative humidity, non-condensing