8-/16-/24-Port 10/100TX 802.
Table of Contents 1. Package Contents........................................................................................ 3 2. Requirements.............................................................................................. 4 3. Starting Web Management........................................................................... 5 3.1 Logging in to the Managed PoE Switch................................................... 5 3.2 Saving Configuration via Web.........................................
1. Package Contents Thank you for purchasing PLANET 8-/16-/24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switches, FGSD-1008HPS, FGSW1816HPS, FGSW-2624HPS and FGSW-2624HPS4. “Managed PoE Switch” mentioned in this quick installation guide refers to the above switches. Open the box of the Managed PoE Switch and carefully unpack it.
2. Requirements zz Workstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. zz Workstations are installed with Ethernet NIC (Network Interface Card) zz Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003.
3. Starting Web Management The following shows how to start up the Web Management of the Managed PoE Switch. Note the Managed PoE Switch is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address. For example, the default IP address of the Managed PoE Switch is 192.168.0.100, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Default IP Address: 192.168.0.100 Default Username: admin Default Password: admin Figure 3-2: Login Screen 3. After entering the password, the main screen appears as Figure 3-3 shows.
The Switch Menu on the top and left of the Web page lets you access all the commands and statistics the Managed PoE Switch provides. Figure 3-4: Switch Menu Now, you can use the Web management interface to continue the Switch management or manage the Switch by console interface. Please refer to the user’s manual for more. 3.
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ45 type of serial port of the Managed PoE Switch. PC / Workstation with Terminal Emulation Software Managed Switch RS232 to RJ45 Cable Serial Port RJ45 Console Port Figure 4-1: Console Connectivity A terminal program is required to make the software connection to the Managed PoE Switch. 1. Run terminal program on the OS. 2.
4.1 Logging on to Console Once the terminal is connected to the device, power on the Managed PoE Switch and the terminal will display “running testing procedures”. Then, the following message asks to log in user name and password. The factory default user name and password are shown as follows and the login screen in Figure 4-3 appears.
Configuring IP Address 3. At the “>” prompt, enter the following command and press as shown in Figure 4-5. > config ip address 192.168.1.100 > config ip submask 255.255.255.0 Figure 4-5: Configuring IP Address Screen The previous command would apply the following settings for the Managed PoE Switch. IP Address: 192.168.1.100 Subnet Mask: 255.255.255.0 4. Repeat step 1 to check if the IP address has changed. 4.
5. Recovering Back to Default Configuration IP address has been changed or admin password has been forgotten – To reset the IP address to the default IP address “192.168.0.100” or reset the login password to default value, press the hardware-based reset button on the front panel for about 5 seconds. After the device is rebooted, you can log in to the management Web interface within the same subnet of 192.168.0.xx.
6. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQs: http://www.planet.com.tw/en/support/faq Switch support team mail address: support@planet.com.tw FGSD-1008HPS(V3), FGSW-1816HPS(V3), FGSW-2624HPS(V4) and FGSW-2624HPS4(V3) User’s Manual: https://www.planet.com.