Quick Guide

8
4. Terminal Setup
Tocongure thesystem,connectaserialcabletoaCOMportonaPCornotebook
computer and to RJ45 type of serial port of the Managed PoE Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Console Connectivity
A terminal program is required to make the software connection to the Managed
PoE Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
 Baud: 115200
 Data bits: 8
Parity:None
 Stop bits: 1
Flowcontrol:None
Figure 4-2: COM Port Conguration