8-Port 10/100TX 802.
Copyright Copyright © 2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be re-produced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-ference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications.
Table Of Contents 1. Introduction................................................................................................ 5 1.1 Checklist.............................................................................................. 5 1.2 Product Description............................................................................... 5 1.3 Features.............................................................................................. 6 1.4 Specifications.....................................
1. Introduction 1.1 Checklist Check the contents of your package for the following parts FSD-1008HP x 1 User’s Manual x 1 Power Cord x 1 Rubber Feet x 4 Rack-mounting Brackets Screws Package x 8 If any of these pieces are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair. 1.
watts of power output for each port and a total PoE budget of 120 watts for eight 10/100Mbps TP ports, and two 10/100Mbps uplink ports. The eight 802.3at PoE+ ports provide PoE power injector function which is able to drive 8 IEEE 802.3at compliant powered devices. The FSD-1008HP also provides a simple, cost-effective, and non-blocking wire-speed performance with 9-inch metal housing suitable for desktop deployment for SOHO and department network applications.
Hardware zz 9-inch desktop size, 1U height, rack mountable zz LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act zz Fanless design zz Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) 1.4 Specifications Model FSD-1008HP Hardware Specifications Copper Port 10 10/100/BASE-TX MDI/MDIX Ports PoE Injector Port 8-port with 802.
Weight 1230 g Power Requirements AC 100~240V, 50/60Hz, 2.5A max Power Consumption/Dissipation Max. 120 watts/409.4 BTU Thermal Fan Fanless Power over Ethernet PoE Standard IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span PoE Power Output Per port 55V DC, 540mA. max. 30 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 120 watts Max. Number of Class 2 PDs 8 Max. Number of Class 3 PDs 8 Max.
2. Hardware Description The switch provides two different running speeds – 10Mbps and 100Mbps, and automatically distinguishes the speed of the incoming connection. This section describes the hardware features of the FSD-1008HP. For easier management and control of the FSD-1008HP, familiarize yourself with its display indicators and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting any network device to the FSD-1008HP, please read this chapter carefully. 2.
This mode makes the FSD-1008HP operate as a VLAN isolation switch and 1. Port 1 to port 8 will isolate respectively. 2. Port 1 to port 8 can only communicate with port 9 and port 10 (uplink port). 3. 30-watt PoE transmit distance of 250m at speed of 10Mbps. Standard VLAN Extend Please reboot the FSD-1008HP after adjusting the DIP switch.
2.1.1 LED Indicators System LED Color PWR Green Function Lights to indicate that the Switch has power. Per 10/100Mbps Port LED Color PoE-in-use Orange Speed/ LNK/ACT Green Function Lights to indicate the port is providing 55V DC in-line power. (1-8 ports) Lights to indicate the Switch is successfully connecting to the network at 10/100Mbps. Blinks to indicate that the Switch is actively sending or receiving data over that port. 2.
3. Hardware Installation Start up Please refer to the following for your cabling: 10/100BASE-TX All 10/100BASE-TX ports come with Auto-Negotiation capability. They automatically support 100BASE-TX and 10BASE-T networks. Users only need to plug a working network device into one of the 10/100 BASE-TX ports, and then turn on the FSD1008HP. The port will automatically run in 10Mbps, 20Mbps, 100Mbps or 200Mbps after the negotiation with the connected device.
3.1 Desktop Installation To install the FSD-1008HP on desktop, simply follow the following steps: Step 1: Attach the rubber feet to the recessed areas on the bottom of the FSD1008HP, as shown in Figure 3-1. 2 2 4 6 8 1 3 5 7 08HP 9 PoE 4 LNK ACT PoE In-Us e PoE PWR FSD-10 6 8 10 Standard VLAN Extend 1 3 5 8-Port 10 2-Port 10/100TX 802.
Step 5: Supply power to the FSD-1008HP. A. Connect one end of the power cable to the FSD-1008HP. B. Connect the power plug of the power cable to a standard wall outlet. When the FSD-1008HP receives power, the Power LED should remain solid Green. 3.2 Rack Mounting To install the FSD-1008HP in a 19-inch standard rack, follow the instructions described below. Step 1: Place your FSD-1008HP on a hard flat surface, with the front panel positioned towards your front side.
Step 5: After the brackets are attached to the FSD-1008HP, use suitable screws to securely attach the brackets to the rack, as shown in Figure 3-3. 2 2 4 6 8 1 3 5 7 9 PoE 4 LNK ACT PoE In-Use PoE PWR FSD-1008HP 6 8 10 Standard VLAN Extend 1 3 5 8-Port 10/10 2-Port 10/100TX 802.3at 0TX Desk PoE + top Switc h 7 9 Uplink 10 Figure 3-3: Mounting the FSD-1008HP in a Rack Step 6: Proceed with Steps 4 and 5 of session 3.
150mm FSD-1008HP Switch Bottom Side 50/60Hz, 1.
4. Troubleshooting This chapter contains information to help you solve issues. If the FSD-1008HP is not functioning properly, make sure the FSD-1008HP was set up according to instructions in this manual. Q1: The Link LED is not lit. Solution: Check the cable connection and also try to swap one new cable. Q2: 100BASE-TX port link LED is lit, but the traffic is irregular. Solution: Make sure the attached device is not set to full duplex. Some devices use a physical or software switch to change duplex modes.
Appendix A - 10/100Mbps, 10/100BASE-TX When connecting Switch to another Fast Ethernet switch, a straight-through or crossover cable might be necessary. Each port of the Switch supports auto-MDI/ MDI-X detection, meaning you can directly connect the Switch to any Ethernet devices without making a crossover cable.
There are 8 wires on a standard UTP/STP cable and each wire is color-coded.
