User's Manual

Figure A-1: Straight-Through and Crossover Cable
Please make sure your connected cable is with same pin assignment and color as
above picture before deploying the cables into your network.
A.2 100Mbps, 100Base-FX, SMI type connector
FT-807 is using POF SMI type connector that is mostly being used for IEEE1394b
transmission. The followings show the basic information.
The POF Cable should be a dual wire cable with 0.98mm optic core
with cladding diameter 1mm. Also with jacket in diameter: 2.2 mm.
The SMI connector will as like the figure
left. You can check with your network
device dealer or administrator for the
availability of the cable and connector.
Part No. 2010-AA3330-001