Datasheet

GPL-8000
2
– RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
– MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
• Portmirroringtomonitortheincomingoroutgoingtra󰀩cona
particular port (many to 1)
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
– IEEE 802.1p CoS/DSCP/Precedence
– VLAN ID
– Policy-based ingress and egress QoS
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
– Time-based ACL
• DHCPSnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console and Telnet Command Line Interface
– HTTP web switch management
– SNMP v1 and v2c switch management
– SSHv2, SSLv3, TLSv1.0 and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and events)
– SNMPtrapforinterfaceLinkUpandLinkDownnotication
11.5 Miles Last Mile
128 ONTs
GPON ONTs
GPL-8000
(GPON OLT)
1:128 Splitter
PON
Passive Optical Network
PON
Point to Multi-Point Application
PON
PON
PON
PON
PON
PON
PON
PON
PON
PON
PON
PON
Flexible and Extendable 10Gb Ethernet Solution
The GPL-8000 has four 10G SFP+ uplink ports to deliver ultra-high speed
networking over long distances to service providers. Each of the 10G SFP+
slots supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With
its 4 ports, 10G Ethernet link capability and additional 8-port 1G Ethernet
link capability, the administrator now can flexibly choose the suitable SFP/
SFP+ transceiver according to the transmission distance or the transmission
speed required to extend the network efficiently. The GPL-8000 provides broad
bandwidth and powerful processing capacity for FTTx applications for distribution
data link.
Extractive Power Supply Design to Increase Flexibility
The GPL-8000 is equipped with one extractive 100~240V AC power supply unit,
so it is easy to replace the power for users. Besides, the GPL-8000 reserves
another backup power slot on the rear panel and users can add the second
AC or DC power to the redundant power supply installation. The AC power or
DC power is optional. The redundant power system is specifically designed to
handle the demands of high-tech facilities requiring the highest power integrity.
Layer 3 Routing Support
TheGPL-8000enablestheadministratortoconvenientlyboostnetworke󰀩ciency
by configuring Layer 3 static routing manually, the RIP (Routing Information
Protocol) or OSPF (Open Shortest Path First) settings automatically.
■TheRIPcanemploythehopcountasaroutingmetricandpreventrouting
loops by implementing a limit on the number of hops allowed in a path from
the source to a destination.
■TheOSPFisaninteriordynamicroutingprotocolforautonomoussystem
based on link-state. The protocol creates a link-state database by exchanging
link-states among Layer 3 switches, and then uses the Shortest Path First
algorithm to generate a route table based on that database.