User's Manual

106
Users Manual of GPL-8000
Figure 3: Interface ONU Bind Relationship Configuration
Click “Detail” to show the concrete ONU binding relationship of the concrete interface. Select an ONU and
click “Delete” to remove the binding or click “Go Back” to return to the default setting.
Click “New” on the top left of the interface to create a new “Interface ONU Bind Relationship Config” and the
corresponding interface will pop up:
Figure 4: Interface ONU Bind Relationship List GPON
You can “Reset” the binding relationship and fill in the password and ONU ID. Click “Apply” to apply the
configuration; click “Reset” to reset the information; click “Go Back” after you complete the configuration.
Figure 5: Interface ONU Bind Relationship Config GPON
7.4.3 ONU Discover Mode
On the left navigation bar, click “
GPON Interface Config
” -> “
ONU Discover Mode
”, and the following page
appears.