User's Manual

Table Of Contents
119
Users Manual of GPL-8000
On this page you can set the reception speed and transmission speed of a port. By default, all ports have no
speed limited.
7.7.4 Port mirroring
If you click Advanced Config -> Port Mirror in the navigation bar, the Port Mirror Config page appears, as
shown in figure 5.
Figure 5: Port mirror configuration
Click the drop-down list on the right side of "Mirror Port" and select a port to be the destination port of mirror.
Click a checkbox and select a source port of mirror, that is, a mirrored port.
RX The received packets will be mirrored to the destination port.
TX The transmitted packets will be mirrored to a destination port.
RX & TX The received and transmitted packets will be mirrored
simultaneously.