User's Manual

133
Users Manual of GPL-8000
Figure 8: Applying the MAC access control list
7.7.13 Link Aggregation Configuration
If you click Advanced Config ->Port Channel in the navigation bar, the Port aggregation Config page
appears, as shown in figure 8.
Figure 8: Port aggregation configuration
If you click New, an aggregation group can be created. Up to 32 aggregation groups can be configured
through Web and up to 8 physical ports in each group can be aggregated. If you click Cancel, you can delete
a selected aggregation group; if you click Modify, you can modify the member port and the aggregation
mode.
Figure 9: Setting the member port of the aggregation group
An aggregation group is selectable when it is created but is not selectable when it is modified.
When a member port exists on the aggregation group, you can choose the aggregation mode to be static,
LACP active or LACP passive.
You can click “>>” and “<<” to delete and add a member port in the aggregation group.