User's Manual
Table Of Contents
- 1. Introduction
- 3. Web-based Management
- 4. Basic Configuration
- 4.1 System Management Configuration
- 4.1.1. File Management Configuration
- 4.1.1.1. Managing the file system
- 4.1.1.2. Commands for the file system
- 4.1.1.3. Starting up from a file manually
- 4.1.1.4. Updating software
- 4.1.1.5. Updating configuration
- 4.1.1.6. Using ftp to perform the update of software and configuration
- 4.1.2. Basic System Management Configuration
- 4.1.2.1. Configuring Ethernet IP address
- 4.1.2.2. Configuring default route
- 4.1.2.3. Using ping to test network connection state
- 4.1.3. HTTP Configuration
- 4.1.3.1. Configuring HTTP
- 4.1.3.2. Examples to http configuration
- 4.2 Terminal Configuration
- 4.3 Remote Monitoring
- 4.4 SSH Configuration commands
- 4.4.1. Introduction
- 4.4.1.1. SSH server
- 4.4.1.2. SSH client
- 4.4.1.3. Function
- 4.4.2. Configuration Tasks
- 4.4.2.1. Configuring the authentication method list
- 4.4.2.2. Configuring the access control list
- 4.4.2.3. Configuring the authentication timeout value
- 4.4.2.4. Configuring the times of authentication retrying
- 4.4.2.5. Enabling SSH server
- 4.4.3. SSH server Configuration Example
- 4.4.3.1. Access control list
- 4.4.3.2. Global configuration
- 4.1 System Management Configuration
- 5. Remote Monitoring
- 6. Security Configuration
- Chapter 6.
- 6.1 AAAConfiguration
- 6.1.1 AAA Overview
- 6.1.2 AAA Configuration Process
- 6.1.3 AAA Authentication Configuration Task List
- 6.1.4 AAA Authentication Configuration Task
- 6.1.4.1 Configuring Login Authentication Using AAA
- 6.1.4.2 Enabling Password Protection at the Privileged Level
- 6.1.4.3 Configuring Message Banners for AAA Authentication
- 6.1.4.4 Configuring a Login Banner
- 6.1.4.5 Configuring a Failed-Login Banner
- 6.1.4.6 Instruction
- 6.1.4.7 AAA authentication username-prompt
- 6.1.4.8 AAA authentication password-prompt
- 6.1.4.9 Establishing Username Authentication
- 6.1.4.10 Enabling password
- 6.1.5 AAA Authentication Configuration Example
- 6.1.6 AAA Authorization Configuration Task List
- 6.1.7 AAA Authorization Configuration Task
- 6.1.8 AAA Authorization Example
- 6.1.9 AAA Accounting Configuration Task List
- 6.1.10 AA Accounting Configuration Task
- 6.2 Configuring RADIUS
- 6.3 Web Authentication Configuration
- 7. Web Configuration
- Chapter 7.
- 7.1 HTTP Switch Configuration
- 7.2 Configuration Preparation
- 7.3 Basic Configuration
- 7.4 GPON Interface Config
- 7.5 ONU Config Profile
- 7.6 ONU Interface Config
- 7.7 Advanced Config
- 7.7.1 Configuring Port Description
- 7.7.2 Configuring the Attributes of the Port
- 7.7.3 Rate control
- 7.7.4 Port mirroring
- 7.7.5 VLAN Settings
- 7.7.6 Configuring the VLAN Interface
- 7.7.7 LDP Configuration
- 7.7.8 STP Configuration
- 7.7.9 Port security
- 7.7.10 Storm control
- 7.7.11 IP Access Control List
- 7.7.12 MAC Access Control List
- 7.7.13 Link Aggregation Configuration
- 7.7.14 Ring Protection Configuration
- 7.7.15 DDM Configuration
- 7.7.16 MTU Config
- 7.8 Layer 3 Configuration
- 7.9 Remote Monitor configuration
- 7.10 System Management
- 8. Interface Configuration
- 9. Interface Range Configuration
- 10. Port Physical Characteristics Configuration
- 11. Port Additional Characteristics Configuration
- 12. Configuring Port Mirroring
- 13. Configuring MAC Address Attribute
- 14. Configuring MAC List
- 15. Configuring 802.1x
- Chapter 15.
- 15.1 802.1x Configuration Task List
- 15.2 802.1x Configuration Task
- 15.2.1 Configuring 802.1x Port Authentication
- 15.2.2 Configuring 802.1x Multiple Port Authentication
- 15.2.3 Configuring Maximum Times for 802.1x ID Authentication
- 15.2.4 Configuring 802.1x Re-authentication
- 15.2.5 Configuring 802.1x Transmission Frequency
- 15.2.6 Configuring 802.1x User Binding
- 15.2.7 Configuring Authentication Method for 802.1x Port
- 15.2.8 Selecting Authentication Type for 802.1x Port
- 15.2.9 Configuring 802.1x Accounting
- 15.2.10 Configuring 802.1x guest-vlan
- 15.2.11 Forbidding Supplicant with Multiple Network Cards
- 15.2.12 Resuming Default 802.1x Configuration
- 15.2.13 Monitoring 802.1x Authentication Configuration and State
- 15.3 802.1x Configuration Example
- 16. VLAN Configuration
- 17. GVRP Configuration
- 18. Private VLAN Settings
- Chapter 18.
- 18.1 Private VLAN Settings
- 18.2 Overview of Private VLAN
- 18.3 Private VLAN Type and Port Type in Private VLAN
- 18.4 Private VLAN Configuration Task List
- 18.5 Private VLAN Configuration Tasks
- 18.5.1 Configuring Private VLAN
- 18.5.2 Configuring the Association of Private VLAN Domains
- 18.5.3 Configuring the L2 Port of Private VLAN to Be the Host Port
- 18.5.4 Configuring the L2 Port of Private VLAN to Be the Promiscuous Port
- 18.5.5 Modifying Related Fields of Egress Packets in Private VLAN
- 18.5.6 Displaying the Configuration Information of Private VLAN
- 18.6 Configuration Example
- 19. STP Configuration
- Chapter 19.
- 19.1 Configuring STP
- 19.1.1 STP Introduction
- 19.1.2 SSTP Configuratiom Task List
- 19.1.3 SSTP Configuration Task
- 19.1.3.1 Selecting STP Mode
- 19.1.3.2 Disabling/Enabling STP
- 19.1.3.3 Configuring the Switch Priority
- 19.1.3.4 Configuring the Hello Time
- 19.1.3.5 Configuring the Max-Age Time
- 19.1.3.6 Configuring the Forward Delay Time
- 19.1.3.7 Configuring the Port Priority
- 19.1.3.8 Configuring the Path Cost
- 19.1.3.9 Configuring Auto-Designated Port
- 19.1.3.10 Monitoring STP State
- 19.1.4 Configuring VLAN STP
- 19.1.5 RSTP Configuration Task List
- 19.1.6 RSTP Configuration Task
- 19.2 Configuring MTSP
- 19.2.1 MSTP Overview
- 19.2.2 MSTP Configuration Task List
- 19.2.3 MSTP Configuration Task
- 19.2.3.1 Default MSTP Configuration
- 19.2.3.2 Enabling and Disabling MSTP
- 19.2.3.3 Configuring MST Area
- 19.2.3.4 Configuring Network Root
- 19.2.3.5 Configuring Secondary Root
- 19.2.3.6 Configuring Bridge Priority
- 19.2.3.7 Configuring STP Time Parameters
- 19.2.3.8 Configuring Network Diameter
- 19.2.3.9 Configuring Maximum Hop Count
- 19.2.3.10 Configuring Port Priority
- 19.2.3.11 Configuring Path Cost of the Port
- 19.2.3.12 Configuring Port Connection Type
- 19.2.3.13 Activating MST-Compatible Mode
- 19.2.3.14 Restarting Protocol Conversion Check
- 19.2.3.15 Checking MSTP Information
- 20. STP Optional Characteristic Configuration
- 21. Link Aggregation Configuration
- 22. PDP Configuration
- 23. LLDP Configuration
- Chapter 23.
- 23.1 LLDP
- 23.1.1 LLDP Introduction
- 23.1.2 LLDP Configuration Task List
- 23.1.3 LLDP Configuration Task
- 23.1.3.1 Disabling / enabling LLDP
- 23.1.3.2 Configuring holdtime
- 23.1.3.3 Configuring timer
- 23.1.3.4 Configuring reinit
- 23.1.3.5 Configuring To-Be-Sent TLV
- 23.1.3.6 Configuring the Transmission or Reception Mode
- 23.1.3.7 Configuring Show-Relative Commands
- 23.1.3.8 Configuring the Deletion Commands
- 23.1.3.9 Configuring Debugging Commands
- 24. FlexLinkLite Configuration
- 25. BackupLink Configuration
- 26. EAPS Configuration
- Chapter 26.
- 26.1 Introduction of Fast Ethernet Ring Protection
- 26.2 Fast Ethernet Ring Protection Configuration
- 27. MEAPS Settings
- Chapter 27.
- 27.1 MEAPS Introduction
- 27.1.1 MEAPS Overview
- 27.1.2 Basic Concepts of MEAPS
- 27.1.2.1 Domain
- 27.1.2.2 Ring
- 27.1.2.3 Major Ring
- 27.1.2.4 Sub Ring
- 27.1.2.5 Control VLAN
- 27.1.2.6 Data VLAN
- 27.1.2.7 Master Node
- 27.1.2.8 Transit Node
- 27.1.2.9 Edge Node and Assistant Node
- 27.1.2.10 Primary Port and Secondary Port
- 27.1.2.11 Transit Port
- 27.1.2.12 Common Port and Edge Port
- 27.1.2.13 FLUSH MAC FDB
- 27.1.2.14 Complete Flag of Ring
- 27.1.3 Types of EAPS Packets
- 27.1.4 Fast Ethernet Ring Protection Mechanism
- 27.2 Fast Ethernet Ring Protection Configuration
- 27.3 Appendix
- 28. ELPS Configuration
- 29. UDLD Configuration
- 30. IGMP-Snooping Configuration
- Chapter 30.
- 30.1 IGMP-snooping Configuration
- 30.1.1 IGMP-snooping Configuration Task
- 30.1.1.1 Enabling/Disabling IGMP-Snooping of VLAN
- 30.1.1.2 Adding/Deleting Static Multicast Address of VLAN
- 30.1.1.3 Configuring immediate-leave of VLAN
- 30.1.1.4 Configuring the Function to Filter Multicast Message Without Registered Destination Addresss
- 30.1.1.5 Configuring Router Age Timer of IGMP-snooping
- 30.1.1.6 Configuring Response Time Timer of IGMP-Snooping
- 30.1.1.7 Configuring Querier of IGMP-Snooping
- 30.1.1.8 Monitoring and Maintaining IGMP-Snooping
- 30.1.1.9 IGMP-Snooping Configuration Example
- 30.1.1 IGMP-snooping Configuration Task
- 31. IGMP-Proxy Configuration
- 32. MLD-Snooping Configuration
- Chapter 32.
- 32.1 MLD-Snooping Configuration
- 32.1.1 IPv6 Multicast Overview
- 32.1.2 MLD-Snooping Multicast Configuration Tasks
- 32.1.2.1 Enabling/Disabling MLD-Snooping Multicast
- 32.1.2.2 Enabling/Disabling the Solicitation of Hardware Forward of Multicast Group
- 32.1.2.3 Adding/Canceling the Static Multicast Address of VLAN
- 32.1.2.4 Setting Router Age Timer of MLD-Snooping
- 32.1.2.5 Setting Response Time Timer of MLD-Snooping
- 32.1.2.6 Setting the Port of the Static Multicast Router
- 32.1.2.7 Enabling/Disabling Immediate Leave
- 32.1.2.8 Monitoring and Maintaining MLD-Snooping Multicast
- 33. OAM Configuration
- 34. CFM and Y1731 Configuration
- 35. DHCP-Snooping Configuration
- Chapter 35.
- 35.1 DHCP-Snooping Configuration
- 35.1.1 DHCP-Snooping Configuration Tasks
- 35.1.1.1 Enabling/Disabling DHCP-Snooping
- 35.1.1.2 Enabling DHCP-Snooping in a VLAN
- 35.1.1.3 Setting an Interface to a DHCP-Trusting Interface
- 35.1.1.4 Enabling DAI in a VLAN
- 35.1.1.5 Setting an Interface to an ARP-Trusting Interface
- 35.1.1.6 Enabling Source IP Address Monitoring in a VLAN
- 35.1.1.7 Setting an Interface to the One Which is Trusted by IP Source Address Monitoring
- 35.1.1.8 Configuring the TFTP Server for Backing up Interface Binding
- 35.1.1.9 Configuring a File Name for Interface Binding Backup
- 35.1.1.10 Configuring the Interval for Checking Interface Binding Backup
- 35.1.1.11 Configuring Interface Binding Manually
- 35.1.1.12 L2 Switch Forwarding DHCP Packets
- 35.1.1.13 Monitoring and Maintaining DHCP-Snooping
- 35.1.1.14 Example of DHCP-Snooping Configuration
- 35.1.1 DHCP-Snooping Configuration Tasks
- 36. MACFF Configuration
- 37. IEEE 1588 Transparent Clock Configuration
- 38. Layer 2 Tunnel Protocol Configuration
- 39. Loopback Detection Configuration
- Chapter 39.
- 39.1 Setting Loopback Detection
- 39.1.1 Introduction of Loopback Detection
- 39.1.2 Loopback Detection Configuration Tasks
- 39.1.3 Setting Loopback Detection
- 39.1.3.1 Configuring Loopback Detection Globally
- 39.1.3.2 Configuring Port Loop Check
- 39.1.3.3 Configuring a Port to Conduct Loopback Detection in Specified VLAN
- 39.1.3.4 Configuring the Loopback Detection Interval of Port (Packet transmission interval, controlled port recovery time)
- 39.1.3.5 Configuring Port Control
- 39.1.3.6 Configuring the Destination MAC Address of Loopback Detection Packet
- 39.1.3.7 Configuring Loopback to Exist on a Port by Default
- 39.1.3.8 Displaying the Configuration of Global Loopback Detection
- 39.1.3.9 Displaying the Configuration of Port Loopback Detection
- 39.1.4 Configuration Example
- 40. QoS Configuration
- Chapter 40.
- 40.1 QoS Configuration
- 40.1.1 QoS Overview
- 40.1.2 QoS Configuration Task List
- 40.1.3 QoS Configuration Tasks
- 40.1.3.1 Setting the Global CoS Priority Queue
- 40.1.3.2 Setting the Bandwidth of the CoS Priority Queue
- 40.1.3.3 Setting the Schedule Policy of the CoS Priority Queue
- 40.1.3.4 Configuring the Minimum and Maximum Bandwidths of CoS Priority Queue
- 40.1.3.5 Configuring Weighted Random Early Detection
- 40.1.3.6 Setting the Default CoS Value of a Port
- 40.1.3.7 Setting the CoS Priority Queue of a Port
- 40.1.3.8 Setting the CoS Priority Queue of a Port
- 40.1.3.9 Establishing the QoS Policy Mapping
- 40.1.3.10 Setting the Description of the QoS Policy Mapping
- 40.1.3.11 Setting the Matchup Data Flow of the QoS Policy Mapping
- 40.1.3.12 Setting the Actions of the Match-up Data Flow of the QoS Policy Mapping
- 40.1.3.13 pplying the QoS Policy on a Port
- 40.1.3.14 Displaying the QoS Policy Mapping Table
- 40.1.4 QoS Configuration Example
- 41. DoS Attack Prevention Configuration
- 42. Attack Prevention Configuration
- 43. Network Protocol Configuration
- Chapter 43.
- 43.1 Configuring IP Addressing
- 43.1.1 IP Introduction
- 43.1.2 Configuring IP Address Task List
- 43.1.3 Configuring IP Address
- 43.1.3.1 Configuring IP Address at Network Interface
- 43.1.3.2 Configuring Multiple IP Addresses on Network Interface
- 43.1.3.3 Configuring Address Resolution
- 43.1.3.4 Configuring Routing Process
- 43.1.3.5 Configuring Broadcast Message Handling
- 43.1.3.6 Detecting and Maintaining IP Addressing
- 43.1.3.7 IP Addressing Example
- 43.2 Configuring NAT
- 43.3 Configuring DHCP
- 43.3.1 Introduction
- 43.3.2 Configuring DHCP Client
- 43.3.3 Configuring DHCP Server
- 43.3.3.1 DHCP Server Configuration Tasks
- 43.3.3.2 Configuring DHCP Server
- 43.3.3.3 Enabling DHCP server
- 43.3.3.4 Disabling DHCP server
- 43.3.3.5 Configuring ICMP detection parameter
- 43.3.3.6 Configuring database storage parameter
- 43.3.3.7 Configuring DHCP server address pool
- 43.3.3.8 Configuring DHCP server address pool
- 43.3.3.9 Monitoring DHCP server
- 43.3.3.10 Clearing up information about DHCP server
- 43.3.3.11 DHCP Server Configuration Example
- 43.4 IP Service Configuration
- 44. IP ACL Application Configuration
- 45. Routing Configuration
- Chapter 45.
- 45.1 Configuring RIP
- 45.1.1 Overview
- 45.1.2 Configuring RIP Task List
- 45.1.3 Configuring RIP Tasks
- 45.1.3.1 Starting up RIP
- 45.1.3.2 Allowing RIP Routing to Update the Single-Program Broadcast
- 45.1.3.3 Applying the Offset to the Routing Weight
- 45.1.3.4 Adjusting the Timer
- 45.1.3.5 Specifying the RIP Version Number
- 45.1.3.6 Activating RIP Authentication
- 45.1.3.7 Forbidding Routing summary
- 45.1.3.8 Forbidding the Authentication of the Source IP Address
- 45.1.3.9 Configuring the Maximum Number of Routes
- 45.1.3.10 Aactivating or Forbidding Horizon Split
- 45.1.3.11 Monitoring and Maintaining RIP
- 45.1.4 RIP Configuration Example
- 45.2 Configuring BEIGRP
- 45.2.1 Overview
- 45.2.2 BEIGRP Configuration Task List
- 45.2.3 BEIGRP Configuration Task
- 45.2.3.1 Activating BEIGRP
- 45.2.3.2 Configuring Bandwidth Occupancy Percent
- 45.2.3.3 Regulating Coefficient of BEIGRP Compound Distance
- 45.2.3.4 Regulating the Compound Distance Through Offset
- 45.2.3.5 Disabling Automatic Route summary
- 45.2.3.6 Customizing Routing summary
- 45.2.3.7 Configuring Forwarding Route
- 45.2.3.8 Configuring Other BEIGRP Parameters
- 45.2.3.9 Monitoring and Maintaining BEIGRP
- 45.2.4 BEIGRP Configuration Example
- 45.3 Configuring OSPF
- 45.3.1 Overview
- 45.3.2 OSPF Configuration Task List
- 45.3.3 OSPF Configuration Task
- 45.3.3.1 Starting up OSPF
- 45.3.3.2 Configuring Interface Parameters of OSPF
- 45.3.3.3 Configuring OSPF in Different Physical Networks
- 45.3.3.4 Configuring OSPF Network Type
- 45.3.3.5 Configuring OSPF Area Parameters
- 45.3.3.6 Configuring Routing Summary in the OSPF Area
- 45.3.3.7 Configuring Forwarded Routing Summary
- 45.3.3.8 Generating Default Route
- 45.3.3.9 Choosing Route ID Through the LOOPBACK Interface
- 45.3.3.10 Configuring OSPF Management Distance
- 45.3.3.11 onfiguring Timer for Routing Calculation
- 45.3.3.12 onitoring and Maintaining OSPF
- 45.3.4 OSPF Configuration Example
- 45.4 Configuring BGP
- 45.4.1 Overview
- 45.4.2 BGP Configuration Task
- 45.4.2.1 Configuring Basic BGP Characteristic
- 45.4.2.1.1 Activating BGP Routing Choice
- 45.4.2.1.2 Configuring BGP Neighbor
- 45.4.2.1.3 Configuring BGP Soft Reconfiguration
- 45.4.2.1.4 Resetting BGP Connection
- 45.4.2.1.5 Configuring Synchronization Between BGP and IGPs
- 45.4.2.1.6 Configuring BGP Route Weight
- 45.4.2.1.7 Configuring Neighbor-Based BGP Routing Filtration
- 45.4.2.1.8 Configuring Port-Based BGP Route Filtration
- 45.4.2.1.9 Cancelling BGP-Updated Next Hop Processing
- 45.4.2.2 Configuring Senior BGP Characteristics
- 45.4.2.2.1 Filtering and Modifying Route Update Through Route Map
- 45.4.2.2.2 Configuring Aggregation Addres
- 45.4.2.2.3 Configuring BGP Community Attribute
- 45.4.2.2.4 Configuring Autonomous System Alliance
- 45.4.2.2.5 Configuring Route Reflector
- 45.4.2.2.6 Shutting down peers
- 45.4.2.2.7 Configuring multihop external peers
- 45.4.2.2.8 Setting BGP route management distance
- 45.4.2.2.9 Modifying BGP timer
- 45.4.2.2.10 omparing MED of the routes from different ASs
- 45.4.2.1 Configuring Basic BGP Characteristic
- 45.4.3 Monitoring and Maintaining BGP
- 45.4.4 BGP Configuration Example
- 45.4.4.1 BGP route map example
- 45.4.4.2 BGP neighbor configuration example
- 45.4.4.3 Example for neighbor-based BGP path filtration
- 45.4.4.4 Example for port-based BGP route filtration
- 45.4.4.5 Example for prefix-list-based route filtration configuration
- 45.4.4.6 BGP route aggregation example
- 45.4.4.7 BGP route reflector configuration example
- 45.4.4.8 BGP autonomous system alliance example
- 45.4.4.9 Example for route map using BGP community attribute
- 46. IP Hardware Subnet Routing Configuration
- 47. IP-PBR Configuration
- 48. Multi-VRF CE Configuration
- 49. Reliability Configuration
- Chapter 49.
- 49.1 Configuring Port Backup
- 49.2 Configuring HSRP protocol
- 49.3 Configuring VRRP
- 49.3.1 VRRP Overview
- 49.3.2 VRRP Configuration Task List
- 49.3.3 VRRP Configuration Tasks
- 49.3.3.1 Enabling VRRP
- 49.3.3.2 Configuring the Time of VRRP
- 49.3.3.3 Setting the VRRP Learning Mode
- 49.3.3.4 Configuring the Description String of VRRP
- 49.3.3.5 Configuring the Privilege for VRRP Hot Backup
- 49.3.3.6 Configuring the Preemption Mode
- 49.3.3.7 Configuring the Privilege for Tracking Other Ports
- 49.3.3.8 Configuring the Authentication String
- 49.3.3.9 Monitoring and Maintaining VRRP
- 49.3.4 VRRP Configuration Example
- 50. Multicast Configuration
- Chapter 50.
- 50.1 Multicast Overview
- 50.2 Basic Multicast Routing Configuration
- 50.2.1 Starting up Multicast Routing
- 50.2.2 Starting up the Multicast Function on the Port
- 50.2.3 Configuring TTL Threshold
- 50.2.4 Cancelling Rapid Multicast Forwarding
- 50.2.5 Configuring Static Multicast Route
- 50.2.6 Configuring IP Multicast Boundary
- 50.2.7 Configuring IP Multicast Rate Control
- 50.2.8 Configuring IP Multicast Helper
- 50.2.9 Configuring Stub Multicast Route
- 50.2.10 Monitoring and Maintaining Multicast Route
- 50.3 IGMP Configuration
- 50.3.1 Overview
- 50.3.2 IGMP Configuration
- 50.3.2.1 Changing Current IGMP Version
- 50.3.2.2 Configuring IGMP Query Interval
- 50.3.2.3 Configuring IGMP Querier Interval
- 50.3.2.4 Configuring Maximum IGMP Response Time
- 50.3.2.5 Configuring IGMP Query Interval for the Last Group Member
- 50.3.2.6 Static IGMP Configuration
- 50.3.2.7 Configuring the IGMP Immediate-leave List
- 50.3.3 IGMP Characteristic Configuration Example
- 50.3.3.1 Example for changing the IGMP version
- 50.3.3.2 IGMP query interval configuration example
- 50.3.3.3 IGMP Querier interval configuration example
- 50.3.3.4 Maximum IGMP response time example
- 50.3.3.5 Example for configuring IGMP query interval for the last group member
- 50.3.3.6 Static IGMP configuration example
- 50.3.3.7 IGMP Immediate-leave list configuration example
- 50.4 PIM-DM Configuration
- 50.5 Configuring PIM-SM
- 51. IPv6 Configuration
- 52. ND Configuration
- 53. RIPNG Configuration
- Chapter 53.
- 53.1 Configuring RIPNG
- 53.1.1 Overview
- 53.1.2 Setting RIPng Configuration Task List
- 53.1.3 RIPng Configuration Tasks
- 53.1.3.1 Allowing to Set the Unicast Routing Protocol
- 53.1.3.2 Enabling a RIPng Case
- 53.1.3.3 Redistributing the Routes of an Unlocal Instance
- 53.1.3.4 Allowing the RIPng Route to Update the Unicasting Broadcast of a Packet
- 53.1.3.5 Applying the Offset on the Routing Weight
- 53.1.3.6 Filtering the Received or Transmitted Routes
- 53.1.3.7 Setting the Management Distance
- 53.1.3.8 Adjusting the Timer
- 53.1.3.9 Summarizing the Routes Manually
- 53.1.3.10 Activating or Forbidding Horizontal Fragmentation
- 53.1.3.11 Monitoring and Maintaining RIPng
- 53.1.4 RIPng Configuration Example
- 54. OSPFv3 Configuration
- Chapter 54.
- 54.1 Overview
- 54.2 OSPFv3 Configuration Task List
- 54.3 OSPFv3 Configuration Tasks
- 54.3.1 Enabling OSPFv3
- 54.3.2 Setting the Parameters of the OSPFv3 Interface
- 54.3.3 Setting OSPFv3 on Different Physical Networks
- 54.3.4 Setting the OSPF Network Type
- 54.3.5 Setting the Parameters of the OSPFv3 Domain
- 54.3.6 Setting the Route Summary in the OSPFv3 Domain
- 54.3.7 Setting the Summary of the Forwarded Routes
- 54.3.8 Generating a Default Route
- 54.3.9 Choosing the Route ID on the Loopback Interface
- 54.3.10 Setting the Management Distance of OSPFv3
- 54.3.11 Setting the Timer of Routing Algorithm
- 54.3.12 Monitoring and Maintaining OSPFv3
- 54.4 OSPFv3 Configuration Example
- 55. BFD Configuration
- 56. SNTP Configuration
- 57. Cluster Management Configuration
6
Users Manual of GPL-8000
7.6.7
ONU Remote Controller ............................................................................................................... 115
Advanced Config ................................................................................................................................... 117
7.7.1
Configuring Port Description ........................................................................................................ 117
7.7.2
Configuring the Attributes of the Port ........................................................................................... 118
7.7.3
Rate control ................................................................................................................................. 118
7.7.4
Port mirroring ............................................................................................................................... 119
7.7.5
VLAN Settings ............................................................................................................................. 120
7.7.6
Configuring the VLAN Interface ................................................................................................... 122
7.7.7
LDP Configuration........................................................................................................................ 123
7.7.8
STP Configuration........................................................................................................................ 124
7.7.9
Port security ................................................................................................................................. 126
7.7.10
Storm control ............................................................................................................................... 128
7.7.11
IP Access Control List .................................................................................................................. 130
7.7.12
MAC Access Control List ............................................................................................................. 132
7.7.13
Link Aggregation Configuration .................................................................................................... 133
7.7.14
Ring Protection Configuration ...................................................................................................... 134
7.7.15
DDM Configuration ...................................................................................................................... 135
7.7.16
MTU Config .................................................................................................................................. 135
Layer 3 Configuration ............................................................................................................................ 136
7.8.1
Setting the Static Route ............................................................................................................... 137
Remote Monitor configuration ............................................................................................................... 138
7.9.1
SNMP Configuration .................................................................................................................... 138
7.9.2
RMON Config .............................................................................................................................. 139
System Management ............................................................................................................................ 142
7.10.1
User Management ....................................................................................................................... 142
7.10.2
Log Management ......................................................................................................................... 146
7.10.3
Diagnostic .................................................................................................................................... 146
7.10.4
Managing the Configuration Files ................................................................................................ 147
7.10.5
Software Management ................................................................................................................. 149
7.10.6
Factory Settings ........................................................................................................................... 150
7.10.7
Rebooting the Device .................................................................................................................. 150
7.10.8
About ........................................................................................................................................... 150
Interface Configuration 151
Chapter 8. ............................................................................................................................................................... 151
Introduction ........................................................................................................................................... 151
8.1.1
Supported Interface Types ........................................................................................................... 151
8.1.2
Interface Configuration Introduction ............................................................................................. 152
Interface Configuration .......................................................................................................................... 153
8.2.1
Configuring Interface Common Attribute ...................................................................................... 153
8.2.2
Monitoring and Maintaining Interface ........................................................................................... 154
8.2.3
Configuring Logistical Interface ................................................................................................... 155
Interface Configuration Example ........................................................................................................... 157
8.3.1
Configuring Public Attribute of Interface ...................................................................................... 157
Interface Range Configuration 158
Chapter 9. ............................................................................................................................................................... 158
Interface Range Configuration Task ...................................................................................................... 158