User's Manual
User’s Manual of GS-6320 Series Managed Switch
127
4.3.2.7 LACP Neighbor Port Status
This page provides a status overview of LACP status for all ports. The LACP Internal Port Status screen in Figure 4-5-2-8
appears.
Figure 4-3-2-8: LACP Neighbor Port Status Page Screenshot
The page includes the following fields:
Object Description
• Port
The switch port number.
• State
The current port state:
Down: The port is not active.
Active: The port is in active state.
Standby: The port is in standby state.
• Aggr ID
The aggregation group ID which the port is assigned to.
• Partner Key
The key assigned to this port by the partner.
• Partner Priority
The priority assigned to this partner port .
• Activity
The LACP mode of the group (Active or Passive).
• Timeout
The timeout mode configured for the port (Fast or Slow).
• Aggregation
Show whether the system considers this link to be "aggregateable"; i.e., a potential
candidate for aggregation.
• Synchronization
Show whether the system considers this link to be "IN_SYNC"; i.e., it has been allocated
to the correct LAG, the group has been associated with a compatible Aggregator, and
the identity of the LAG is consistent with the System ID and operational Key information
transmitted.
• Collecting
Show if collection of incoming frames on this link is enabled.
• Distributing
Show if distribution of outgoing frames on this link is enabled.
• Defaulted
Show if the Actor's Receive machine is using Defaulted operational Partner information.
• Expired
Show if that the Actor's Receive machine is in the EXPIRED state.
Buttons
: Click to refresh the page immediately.
Auto-refresh : Automatic refresh occurs every 3 seconds.