User's Manual

User’s Manual of GS-6320 Series Managed Switch
18
Powerful Security
The GS-6320-24UP2T2XV offers a comprehensive Layer 2 to Layer 4 access control list (ACL) for enforcing security to the
edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP
port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and
MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be
prevented to ensure user privacy.
Enhanced Security and Traffic Control
The GS-6320-24UP2T2XV also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to
prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now
construct highly-secure corporate networks with considerably less time and effort than before.
User-friendly Secure Management
For efficient management, the GS-6320-24UP2T2XV is equipped with console, web and SNMP management interfaces. With
the built-in web-based management interface, the GS-6320-24UP2T2XV offers an easy-to-use, platform independent
management and configuration facility. The GS-6320-24UP2T2XV supports SNMP and it can be managed via any management
software based on the standard SNMP v1 or v2 Protocol. For reducing product learning time, the GS-6320-24UP2T2XV offers
Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches.
Moreover, the GS-6320-24UP2T2XV offers the remotely secure management by supporting SSH, SSL and SNMP v3
connection where the packet content can be encrypted at each session.