User's Manual

User’s Manual of GS-6320 Series Managed Switch
24
1.5 Product Specifications
Product
GS-6320-24UP2T2XV
Hardware Specifications
Copper Ports
24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
2 10GBASE-T RJ45 ports auto negotiation (Port-25 to Port-26), supports
10G/5G/2.5G/1G/100Mbps data rate
SFP+ Slots
2 10GBASE-SR/LR SFP+ interfaces (Port-27 to Port-28)
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console
1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H)
440x300x56mm, 1.25U height
Weight
5478g
LED
System:
SYS (Green), Ring (Green)
AC (Green), DC (Green)
Fan1/2/3 Alert (Red), PoE PWR Alert (Red)
PoE Ethernet Interfaces (Port-1 to Port-24):
af/at PoE (Orange)
bt PoE/UPOE (Green)
Ethernet Interfaces (Port-1 to Port-24):
1000 LNK/ACT (Green), 10/100 LNK/ACT (Orange)
1/10G SFP+ Interfaces (Port-49 to Port-52):
1G (Green), 10G (Orange)
Power Consumption
Max. 740 watts/ 2538.94 BTU
Power Requirements – AC
AC 100~240V, 50/60Hz, 8A
Power Requirements – DC
DC 36~60V, 2A
ESD Protection
6KV DC
Fan
3 smart fans
Network Cables
10G/5G/2.5G/1G/100M BASE-T:
- 10G – Cat 6A/7
- 5G – Cat 6/6A/7
- 1G/2.5G – Cat 5e/6/6A/7
- 100M – Cat 5/5e/6/6A/7
- Cat 5/5e/6/6A/7 UTP cable (maximum 100 meters)
10GBASE-LR/SR/BX:
- 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m
- 9/125μm single-mode fiber optic cable, up to 60km
Switching
Switch Architecture
Store-and-Forward
Switch Fabric
128Gbps/non-blocking
Throughput
95.23Mpps@64Bytes
Address Table
16K entries, automatic source address learning and aging
Shared Data Buffer
32M bits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame
10K bytes