(V5) Quick Guide

– 1 – – 2 –
– 3 –
– 4 –
1. Package Contents
Thank you for purchasing PLANET 12-/24-Port Gigabit IEEE
802.3at PoE+ Managed Injector Hub.
POE-1200G
12-port Gigabit 802.3at PoE+ Managed
Injector Hub (220W)
POE-2400G
24-port Gigabit 802.3at PoE+ Managed
Injector Hub (440W)
HPOE-1200G
12-port Gigabit 802.3at PoE+ Managed
Injector Hub (360W)
HPOE-2400G
24-port Gigabit 802.3at PoE+ Managed
Injector Hub (720W)
Unless the model is specied, the term “PoE+ Managed
Injector Hub” in the following sections means the series of
the product.
The box should contain the following items:
z PoE+ Managed Injector Hub x 1
z Quick Installation Guide x 1
z Power Cord x 1
z Rubber Feet x 4
z Two Rack-mounting Brackets with Screws x 1 set
If any item is found missing or damaged, please contact your
local reseller for replacement.
2. Requirements
The following equipment is necessary for further management.
z Network cables:
Use standard network (UTP) cables with RJ45 connectors.
z Subscriber PC is installed with Ethernet NIC (Network Card)
z The operating system of subscriber PC uses Windows 10/
XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or
other platforms that are compatible with TCP/IP protocols.
3. Starting Web Management
You can manage the PoE+ Managed Injector Hub remotely
by having a remote host with Web browser, such as Microsoft
Internet Explorer, Google Chrome or Mozilla Firefox.
PC / Workstation with
Web Browser
Gigabit 802.3at PoE+ Managed Injector Hub
192.168.0.x
IP Address:
192.168.0.100
RJ45 Management Port
Management
1000 10/100
Please note that the PoE+ Managed Injector Hub is congured
through an Ethernet connection, and make sure the manager
PC must be set to the same IP subnet address; for example,
the default IP address of the PoE+ Managed Injector Hub
is 192.168.0.100 (the factory default IP address), then
the manager PC should be set to 192.168.0.x (where x is a
number between 1 and 254, except 100), and the default
subnet mask is 255.255.255.0.
Enter the default IP address to enable the Web login screen to
appear as in Figure 1.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Note
The following screen is based on the HPOE-2400G.
For the HPOE-1200G/POE-1200G/POE-2400G, the
web screen is the same as that of the HPOE-2400G.
Figure 1: Web Login Screen of PoE+ Managed Injector Hub
After entering the user name and password in the login screen,
the web main screen appears as in Figure 2.
Figure 2: Web Main Screen of PoE+ Managed Injector Hub
Note
For security reason, please change and memorize
the new password after this first setup.