User's Manual

Z-Wave Ceiling-mount Smoke Detector
HZS-200E/HZS-200A
Step 4. In Trigger mode, the trigger time is set. An alarm notification is sent via sensor. If a
sensor is not installed, this step can be skipped.
Click the “Trigger”
button.
Click “Create Trigger”.
Trigger: Name this
trigger.
Device: Select a Z-Wave
device.
Mode: Select “Arm” to
enable alarm.
Scene: When it triggers,
the fan will turn on.
Optional: After
triggering for 5 seconds,
the fan will turn off by
itself.
Switch to “AWAY” to
enable monitor mode.
When one of Z-Wave
devices is triggered,
control pad will alarm.
- 22 -