User's Manual

Z-Wave 4-in-1 Multi Sensor
HZS-300E/HZS-300A
Appendix A: Troubleshooting & Frequently Asked
Questions
Features
This difference between Z-Wave
and ZigBee
z The frequency is different between Z-Wave and ZigBee. ZigBee
is 2.4GHz and Z-Wave is about 900MHz.
z The outdoor distance is different. ZigBee is 10~75 meters and
Z-Wave is about 30 meters.
Z-Wave Device Installation
How to reset the HZS-300 Series
Open the rear cover to send the Alarm Report and then press the
program switch 10 times in 10 seconds to enable the HZS-300 to
send the “Device Reset Locally” command and reset to the factory
default.
Repeater Function
Only HZS-530 Series can extend the frequency range of Z-Wave.
HZS-530 Series can act as a signal repeater to enhance the Z-Wave
wireless communication range. For example, the HAC-1000 (Control
gateway) is installed on the second floor to control over the HZS-300
(4-in-1 Sensor) on the first floor, but the Z-Wave frequency is weak.
Thus, HZS-530 Series can be installed in between the second floor
and the first floor to solve the problem.
- 31 -