Quick Guide

– 1 – – 2 –
– 3 –
– 4 –
1. Introduction
Thank you for purchasing PLANET H.265 Smart IR PoE IP Camera.
The “ICA-x80 series” is used as an alternative name in this Quick
Installation Guide. The following is the ICA-x80 series:
ICA-3280 H.265 1080p Smart IR Bullet IP Camera
ICA-4280 H.265 1080p Smart IR Dome IP Camera
ICA-A3280
H.265 1080p Smart IR Bullet IP Camera with
Articial Intelligence
ICA-A4280
H.265 1080p Smart IR Dome IP Camera with
Articial Intelligence
ICA-M3580P
H.265 5 Mega-pixel Smart IR Bullet IP Camera
with Remote Focus and Zoom
ICA-M4580P
H.265 5 Mega-pixel Smart IR Dome IP Camera
with Remote Focus and Zoom
2. Package Contents
Open the box of the ICA-x80 series and carefully unpack it. The
box should contain the following items:
z The IP Camera x 1
z Quick Installation Guide x 1
z Screw Package x 1
z Waterproof Connector Package x 1
z Drill Template x 1
If any item is found missing or damaged, please contact your local
reseller for replacement.
3. Requirements
z Workstations running Windows XP/2003/2008/Vista/7/8/10, MAC
OS X or later, Linux, UNIX, or other platforms are compatible
with TCP/IP protocols.
z Workstations are installed with Ethernet NIC (Network Interface
Card).
z Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with
RJ45 connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 8.0
or above to access the ICA-x80 series. If the Web
interface of the ICA-x80 series is not accessible, please
turn off the anti-virus software or firewall and then try
it again.
4. Starting Web Management
The following shows how to start up the Web Management of the
ICA-x80 series. Note the ICA-x80 series is congured through an
Ethernet connection. Please make sure the manager PC must be
set to the same IP subnet address.
User PC
(192.168.0.X)
Ethernet Switch
IP camera
Figure 4-1: IP Management Diagram
Note
1. The ICA-x80 series supports IEEE 802.3af; be
reminded to power either from AC to DC adapter or
802.3af PoE switch.
2. The AC to DC adapter is not included in the package.
For example, the ICA-x80 series default network type is DHCP
Client; to search the current IP address of the ICA-x80 series,
follow the procedure below:
1. Download the “PLANET Search Tools” utility from the following
PLANET website link: http://www.planet.com.tw/en/support/down
loads?method=keyword&keyword=PLANET+Search+Tools&view=
6#list
2. Install the “PLANET Search Tools” utility.
3. After the camera utility is launched, all cameras found in your
local area network will be displayed.
4. The existing ICA-x80 series in the local network.
5. Search the ICA-x80 series in the network.
6. Modify the IP parameters of the selected ICA-x80 series.
7. Select the ICA-x80 series you want to congure and double-click
on it.
8. You will be connected to the ICA-x80 series via web browser
automatically.
Figure 4-2: PLANET Search Tools Utility Screen
►
ICA-x80 series
H.265 Smart IR PoE IP Camera