User's Manual

8.4 Video
In the main interface, click "Configuration → Video" to enter the video and audio
configuration interface, where you can set the device video, audio and other functions.
8.4.1 Video
In the main interface click "configuration → video → video" into the video configuration
interface, where you can set the IP Camera device name, stream type, encoding and
other video parameters, as shown in Figure 8-21:
Figure 8-21
【
Stream Type
】
Here Single/Third available.
【
Profile
】
Default is the Main Profile; you can select Baseline Profile or High Profile.
【
Video Encoding
】
Switch the encoding method in the drop-down menu.
【
Resolution
】
Switch the output resolution in the drop-down menu.
【
Framerate
】
Set the frame rate of the current output video of the device.
【
Bit Rate
】
Supports 64-12000kbps. The higher the bit rate goes, the better the video
quality will be, but it occupies the greater network bandwidth and the greater the pressure
transmission.
【
Rate Control
】
Switch the code rate output mode in the drop-down menu -- fixed rate
and variable rate.
【I-Frame Interval】IP Camera acquisition key frame interval, can be set 1-5s.