User's Manual

then reset the time period.
- Method 2: Click the arming time period, two arrows will be displayed at both ends of
the time period. Move the adjustment arrow left or right to adjust the arming time.
- You can set up more than one time period for up to 8 time periods.
- After the day of deployment time is set, if the other time also needs to be set at the
same arming time, click the right side of the timeline "
" copy button; in the "copy
to" interface, check the "Select All" or a day, and then Click "OK".
- After setting, click "Save" to complete the setting of the arming time.
Figure 8-35
Linkage Method: When the motion detection is to open the alarm linkage, there are a
variety of alarm linkages, including conventional linkage and linkage alarm output, as
shown in Figure 8-36:
【
General Linkage
】
Includes uploading SMTP, uploading FTP, uploading cloud and SD
card recording.
【
Upload Via SMTP
】
Select and the system is configured with SMTP. The alarm
information will be sent to the SMTP recipient mailbox.
【
Upload Via FTP
】
Select and the system is configured with the FTP server; it will send
the alarm information to the FTP server.
 When the arming time is set, there can be no overlap between any two
time periods.