User's Manual

Figure 8-48
Step 7: Set the linkage method as needed.
【
Linkage Method
】
refers to the response made by the device when an alarm event
occurs. The linkage includes “General Linkage” and “Capture link”.
○
2E A Intrusion Detection
The area intrusion detection is used to detect whether an object enters the set area in the
video setting area, and the alarm is linked according to the judgment result. The specific
steps are as follows:
Step 1: In the main interface click on the "Configuration → Events → Smart Event→
Intrusion Detection" to enter the Intrusion Detection settings interface, as shown in Figure
8-49.

Face database adapts to JPG files only, PNG.
 Image must not exceed the limit of 200K.
 The image name is preferably the person name.