User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Operating instructions
- Chapter 3 Access to the IP Camera by PVMS Software
- Chapter 4 Access to the IP Camera by Web Client
- 4.4 Main interface description
- Chapter 5 Live preview
- Chapter 6 Playback
- Chapter 7 Picture
- Chapter 8 Configuration
- Chapter 9 Frequently Asked Questions
adjustment arrow, and move the adjustment arrow to adjust the arming time.
- You can set up more than one time period for up to 8 time periods.
- After the day of deployment time is set, if the other time is also needed to set the
same arming time, click the right side of the timeline "
" copy button. In the "copy
to" interface, check the "Select All" or a day, then Click "OK".
- After setting, click "Save" to complete the setting of the arming time.
Figure 8-56
Step 6: Set the linkage method as needed.
【
Linkage Method
】
refers to the response made by the device when an alarm event
occurs. The linkage includes “General Linkage”, “Upload Via SMTP” and “Upload Via
FTP”.
When the arming time is set, there can be no overlap between any two
time periods.