Wireless Cube Fish-Eye IP Camera ICA-W8100 Wireless Cube Fish-Eye IP Camera ICA-W8100
Wireless Cube Fish-Eye IP Camera ICA-W8100 Copyright Copyright © 2013 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. CE Mark Warning This is a Class B product.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Table of Contents Chapter 1. Product Introduction......................................................................... 6 1.1 Package Contents ............................................................................................. 6 1.2 Overview ............................................................................................................. 6 1.3 Features ........................................................................................
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.6.4 Privacy Mask Tab ................................................................................. 55 4.7 Event Setup Execution ................................................................................... 57 4.7.1 Motion Tab ............................................................................................. 57 4.7.2 Video Tab ............................................................................................... 59 4.7.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following items: z z z z z z z Camera unit x 1 Power Adapter x 1 User’s Manual CD x 1 Quick Installation Guide x 1 Stand Package x 1 Bracket x 1 Cloud Activation Card x 1 (For ICA-W8100-CLD model only) 1. If any of the above items are missing, please contact your dealer immediately. 2.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Efficient Event Management The ICA-W8100 is designed with a built-in Passive InfraRed (PIR) motion detection sensor able to detect movement far from 5 meters away. When people pass by or an emergency happens in the specified areas, the ICA-W8100 will “detect” and start recording automatically. Furthermore, it provides an additional function of alarm notification that can send the captured images to the micro SD/SDHC card slot for local storage.
Wireless Cube Fish-Eye IP Camera ICA-W8100 High Quality Streaming via 11n Wireless Connectivity The ICA-W8100 adopts IEEE 802.11n wireless technology to communicate at maximum wireless signal rate and ensures secure transmission with WEP and WPA encryptions. It allows you to stream high quality video to remote sites and mobile devices. A Site Survey feature also allows you to view and connect to nearby wireless networks with ease.
Wireless Cube Fish-Eye IP Camera ICA-W8100 1.4 Product Specifications Product ICA-W8100 Wireless Cube Fisheye IP Camera Camera Image Device 1/4” progressive 1.3 mega-pixel scan CMOS sensor Lens Fish-Eye Lens, 185.5/145/>=200° (H/V/D), F= 2.0, f=0.89 mm Min. Illumination 0.5 lux @ F2 Effective Pixels 1280 x 720 pixels (16:9) PIR Sensor 1 x Built-in sensor with adjustable 70 degrees direction Effective Distance: 5 meters Effective Coverage: 70 degrees Video Video Encoder H.
Wireless Cube Fish-Eye IP Camera ICA-W8100 802.11b: 17dBm(default) +/- 1dBm Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Chapter 2. Hardware Interface 2.1 Physical Descriptions Dimensions 70 x 39 x 99 mm Weight 134g (gross weight) ¾ Front Panel Lens & Focus Ring PIR Sensor LED Microphone Interface Lens & Focus Ring MIC PIR Sensor LED Description User can use this ring to adjust focus manually. The camera has a built-in microphone. This microphone is hidden in the pinhole located on the front panel.
Wireless Cube Fish-Eye IP Camera ICA-W8100 ¾ Bottom Panel Factory Default Reset WPS DC Power Jack LAN Socket ¾ Side Panel Power/LAN LED Wireless LED Micro SD Audio Output 12
Wireless Cube Fish-Eye IP Camera ICA-W8100 Interface Audio Output Jack Description Audio-out jack allows this device to output audio signal. The input power is 5VDC. DC Power Jack Factory Default Reset It supplies the power to the camera with the power adapter included in package. Otherwise, the improper power adapter may damage the unit and result in danger. This button is hidden in the pinhole. This button is used to restore the all factory default settings.
Wireless Cube Fish-Eye IP Camera ICA-W8100 2.2 Hardware Installation 2.2.1 Wall, Ceiling and Table Mounting Installation Step 1. Use the 2 supplied screws to fix the base plate to a flat surface. Step 2. Loosen the lock ring to adjust the desired angle of the camera. Step 3. Tighten the lock ring. Mounting Lock Table Mounting Ceiling Mounting Wall Mounting 2.2.2 Network Installation Step 1. Prepare a PC with Ethernet link to the network Step 2.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Only use the power adapter supplied with the IP camera; otherwise, the product may be damaged. Step 4. Ensure the power adaptor specification matches the power system (110V or 220V) and connect the adaptor to the outlet. Step 5. Connect the LAN port (RJ45) of the camera to a network router. Step 6. You can skip Installation Guide Wizard and start CloudLync registration process.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Then proceed to start CloudLync registration and binding process as discussed in Chapter 3.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder and then press “Next” to continue. Step 5. Please click “Next” to start the installation.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 6. Please click “Close” to complete the installation and launch program immediately. 2.4 Preparation When you install the camera in a LAN environment, you may execute PLANET IPInstaller to discover camera’s IP address and set up related parameters in the camera. 2.4.1 Configuring Network by PLANET IPInstaller Please click “Device Search” button. PLANET IPInstaller will list all networked IP cameras in the LAN.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 3. Double click the item to open the Property Page or click the menu bar > Single Device Setting. Step 4. After filling out the desired settings in the properties, click on “Set” button to complete the configuration settings. 2.4.2 Opening the Web-based UI of Select Camera If IPInstaller finds the IP camera, please select the device you want to view and click the “Open Web” button. Then you could see the video from the IP camera directly.
Wireless Cube Fish-Eye IP Camera ICA-W8100 If the Internet camera is configured correctly, the default Web browser will open to the home page of the selected device. If you find your browser is opened and automatically connected to the camera Home Page, it means you’ve assigned an IP Address to the unit successfully. Now you can close the IP Installer and start to use your camera. 2.5 Using UPnP of Windows XP or 7 2.5.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The “Control Panel” will display on the screen and double click “Add or Remove Programs” to continue. The “Add or Remove Programs” will display on the screen and click Add/Remove Widows Components to continue. The following screen will appear, select “Networking Services” and click “Details” to continue.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The “Networking Services” will display on the screen, select “Universal Plug and Play” and click “OK” to continue. Please click “Next” to continue.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The program will start installing the UPnP automatically. You will see the below pop-up screen, please wait while Setup configures the components.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Double-click “My Network Places” on the desktop, the “My Network Places” will display on the screen and double-click the UPnP icon with Internet camera to view your device in an internet browser. 2.5.2 Windows 7 Go to Start > Control Panel > Network and Internet > Network and Sharing Center, if network discovery is off; click the arrow button to expand the section. Click Turn on network discovery, and then click Apply.
Wireless Cube Fish-Eye IP Camera ICA-W8100 2.6 Setup ActiveX to use the Internet Camera The Internet camera web pages communicate with the Internet camera using an ActiveX control. The ActiveX control must be downloaded from the Internet camera and installed on your PC. Your Internet Explorer security settings must allow for the web page to work correctly.
Wireless Cube Fish-Eye IP Camera ICA-W8100 2.6.1 Internet Explorer 6 for Windows XP From your IE browse Î ”Tools” Î ”Internet Options…” Î ”Security” ΔCustom Level…”, please set up your “Settings” as follows: Set the first 3 items • Download the signed ActiveX controls • Download the unsigned ActiveX controls • Initialize and script the ActiveX controls not masked as safe to Prompt By now, you have finished your entire PC configuration for Internet camera. 2.6.
Wireless Cube Fish-Eye IP Camera ICA-W8100 please set up your “Settings” as follows: Set the first 3 items • Allow previously unused ActiveX control to run… • Allows Scriptlets • Automatic prompting for ActiveX controls By now, you have finished your entire PC configuration for Internet Camera. 2.6.
Wireless Cube Fish-Eye IP Camera ICA-W8100 From your IE browser Î ”Tools” Î ”Internet Options…” Î ”Security” Î ”Trusted Sites” ΔCustom Level…”, please set up your “Settings” as follows: • Enable “Automatic prompting for ActiveX controls” • Prompt “Initialize and script active controls not marked….” By now, you have finished your entire PC configuration for Internet camera.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Chapter 3. Cloud Installation CloudLync is a Cloud NVR (Network Video Recorder) server that provides multiple Live View and Event Recording, and Playback of videos taken by your camera. It also allows you to make changes to your settings remotely. (For ICA-W8100-CLD model only) 3.1 CloudLync Account Registration by PC & Notebook Visit CloudLync website http://www.cloudlync.net/index.php. When the following dialog displays, click Create Account button.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 3. Click the hypertext “Please click to verify your registration” and you will be automatically connected to CloudLync and prompt you with the process of binding the new camera into CloudLync. 3.1.2 Registration through Google Account CloudLync server allows you to use your Google account “User Name” and “Password” for your CloudLync account. This method is recommended and is easier and faster.
Wireless Cube Fish-Eye IP Camera ICA-W8100 1. Google Account provides 5GB free space for recorded video storage. 2. With “Google Account” used to create the CloudLync account, you have to use your Gmail address as email address and click the “Google Login” button every time you need to log-in into CloudLync again. Step 2. Click the Sign in button and you will be prompt with the process of binding the new camera into CloudLync 3.2 Binding Camera into CloudLync by PC & Notebook 3.2.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 3. The Binding dialog will then display to prompt you to provide the camera’s MAC address and Activate Code (serial number). 1. The required data are available from the QR Code Activation Card. 2. These numbers are unique for each camera. Step 4.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 5. After successful binding, click the Close button at the top-right corner. The Setting Table then displays. Step 6. Click the Matrix button at the bottom of the window to display the live view camera surveillance.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 7. Click the Full Screen button to zoom and view the live display in full screen. 3.2.2 Modifying Camera Default Names With several cameras being installed, you may have a hard time identifying which camera is installed with this MAC address. Hence, you may assign unique names to each camera for easy identification, such as names that are related to camera positions. To do so, carry out the following steps. Step 1.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Click this text box to enter a new camera name Click on option button to change the video quality 3.3 CloudLync Account Registration by Smartphone & Tablet 3.3.1 Downloading CloudLync App Download CloudLync App from App Store or Google Play Store by your iPhone or Android phone by searching “CloudLync” as the key word. Alternatively, you may scan the QR Code below with your device to automatically download URL and “CloudLync App” into your Smartphone/tablet. 3.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 2. When the CloudLync Create Account dialog pops-up, enter the required information in the text boxes. Step 3. Tap Apply button to start binding your camera. 3.3.3 CloudLync Registration through “Google Account” Step 1. If you already have a Google account, you can tap the Google Account button to register with CloudLync.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 2. When the Google SIGN UP dialog (see below) pops-up, enter the required information in the text boxes. Step 3. Tap Sign In button to start binding your camera 1. Google Account provides 5GB free space for recorded video storage. 2. If “Google Account” is used to create the CloudLync account, you have to use your Gmail address as email address and tap the “Google Account” button every time you need to log-in into CloudLync again.
Wireless Cube Fish-Eye IP Camera ICA-W8100 3.4 Binding Camera into CloudLync by Smartphone & Tablet With CloudLync account successfully implemented, the Camera List dialog will display to prompt you to start binding your new camera(s) to CloudLync by following the process described below: Step 1. Tap the Add Camera button Step 2. Tap the Next button if the camera connection is okay. Step 3. “Bind IP Camera” window pops-up to prompt for MAC Address and Activate Code input into CloudLync.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step4. The MAC Address (serial number) of the new camera is now being added to the existing list. Tap the serial number to view the camera on-line. Step 5. Live on-line video is now on display. You cannot use your Smartphone to change the camera default designation. You need to use a PC/notebook/Ultrabook to accomplish it.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Chapter 4. Web-based Management This chapter provides setup details of the Internet camera’s Web-based Interface. 4.1 Introduction The Internet camera can be configured with your Web Browser. Before configuring, please make sure your PC is under the same IP segment with Internet camera. 4.2 Connecting to Internet Camera A. Use the following procedures to establish a connection from your PC to the Internet Camera. B.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Click on the message, and click Run Add-on When you see this message, click Run’ to install required ActiveX control After the ActiveX control is installed and run, the first image will be displayed. You should be able to see the images captured from the Internet camera on the web page now. For advanced functions, please refer to instructions given in the following chapters. If you log in the camera as an ordinary user, setting function will be not available.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Button Description With its fisheye lens (180º wide angle panoramic view), the Camera can offer the following live view display modes: 180 degree Ultra Wide Angle View Twin PTZ (pan–tilt–zoom) Views Triple views (1 Ultra Wide Angle View + Twin PTZ View) When the Twin or Triple PTZ display mode is selected, click the ePTZ function tool to display the PTZ setting tools. Protocol: Option for TCP or UDP transmission protocol with H.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Click Browse button to define Recording Path and Recording Filename for the video you are preparing to record. Recording Path: Specify a storage destination path for the video you are going to record. Recording file name: Define a base filename for the video recordings you are going to take. The base filename will auto-expand for each saved video recording. To start recording, click the Recording button.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The information tabbed pane provides the existing system status of the camera which includes Model Name, System Time, Firmware Version, MAC Address, ActiveX Control Version, Wired Network, Wireless Network and DDNS Server Status. 4.4.2 Time Tab The Time tabbed pane is where you set up the clock of your Camera to synchronize with your local time.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.4.3 Security Tab The Security tabbed pane allows you to add new camera User Name and change Password and the surveillance status or User Group. Click the ADD button to access the security setup dialog (shown below).
Wireless Cube Fish-Eye IP Camera ICA-W8100 User Name Enter the new user name to be added into the list (see Note 4 of dialog for proper entry). Password Enter the new password (see Note 4 of dialog for proper entry). Confirm password Enter the password again for authentication (encoded display). Show Password Displays the decoded password when check box is enabled. Three group options are available, namely: Administrator: User is allowed to change camera settings and perform all camera functions.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Download the latest firmware file from the website by executing the following steps: Select firmware file 1) Click the Browse button to access and select the appropriate firmware file from its folder. 2) Click the Upgrade button. The Network camera will then start to upgrade the existing firmware. When upgrade is completed, the camera will reboot automatically.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The General tabbed pane (shown above) allows you to redefine the network and port protocol settings of the Network camera. DHCP This option obtains the available dynamic IP address assigned by the DHCP server each time the camera is connected to the network. Fixed IP Address This option manually assigns a static IP address to the Network camera. PPPoE Select this option to set PPPoE account & password.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Port Settings: HTTP Port: Re-define the existing HTTP Port number in the text box. RTSP Port: Re-define the existing RTSP Port number in the text box. 4.5.2 Wireless Tab The Wireless tabbed pane provides search and display of available wireless networks from which you can select the most suitable one for your camera.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.5.3 DDNS Tab The DDNS tabbed pane allows you to configure the Dynamic Domain Name System of your network device with a host name instead of the IP Address. DDNS Enable Enable the check box to support DDNS function. This model adds Planet easy DDNS that when this function enable will occur hostname with PLANET DDNS and end six of MAC automatically. User don’t go to web of www.planetddns.com apply new account.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Update Time Define a time interval for the device to periodically update and check its access status with website of DNS Service Provider. 4.6 Video & Audio Setup Execution Clicking the Video & Audio button will display the following tabbed panes for defining camera streaming, video, and audio functions. 4.6.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The Stream tabbed pane (see above figure) provides the adjustments for the video quality of the camera streaming function. The pane offers the following three modes of video quality setting: Connection Template Four option modes are available: “Fast,” “General,” “Low,” and “Customized” modes. Mode Three modes of encoding options are offered: “H264”, “MPEG4”, and “MJPEG”.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Quality The options for streaming mode quality are expressed differently between VBR and CBR: VBR: Standard, Good, & Detailed CBR: 64Kbps, 128 Kbps, 256 Kbps, 384 Kbps, 512 Kbps, 768 Kbps, 1M Kbps, 1.5M Kbps Intra Frame Period Available choices are: 5, 8, 10, 15, 20, 25, 30, 40, 50 & 60 frames per period. This function will let you choose how long distance between two I-Frames.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.6.2 Video Tab The Video tabbed pane lets you to perform live adjustments and improvement of the camera captured video effect relative to the target environment. If you experience difficulty in implementing the adjustment parameters, it is recommended that you use the default setting by pressing the Reset button (see figure below) at the back of the camera. Brightness The luminance of the captured image apart from its hue or saturation.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.6.3 Audio Tab The Audio tabbed pane provides the following audio adjustments to your camera microphone and speaker: Mute Enable or disable mute function of the camera microphone. Microphone boost Enable or disable booster function of the camera microphone. Enable this function will amplify the signal from the microphone jack.
Wireless Cube Fish-Eye IP Camera ICA-W8100 The Privacy Mask tabbed pane allows you to mask or block private areas from surveillance for privacy reason. ■ To block a private area from surveillance, follow the procedure below: Step 1. Initially select the masking shape, e.g., “Line,” “Rectangle,” or “Ellipse” you wish to use as screen to block the area from surveillance. Step 2. Click and drag the mouse cursor to lay out a masking screen on the area you wish to block, and then release the mouse right button.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.7 Event Setup Execution Clicking the Event button will display the tabbed panes (see figure below) for defining event recording of the Camera. The ICA-W8100/ICA-W8100-CLD is equipped with a card slot for Micro-SD/SDHC memory card. This storage card is utilized to store recording of local video and still JPEG images taken in response to set events. The recording operation of events is triggered according to the defined schedules 4.7.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Step 4. Click the Save button to apply. ■ Defining multiple motion detection areas: Step 1. After satisfactory positioning of the first detection area as described above, click the Add button again. A second default frame will pop-up on the screen. Drag & resize the frame at the desired location. Step 2. Repeat the above step to add more detection area frames. Total defined motion detection areas cannot exceed 10 frames. Step 3.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.7.2 Video Tab The Video tabbed pane sets the video recording trigger method to use when motion is detected by the Camera. The four methods available for selection are Period, Schedule, Motion, and PIR (passive infrared), each of which can be set up with user scheduled recoding time and duration, as well as defining the video record file target destination.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Schedule This method activates the camera video surveillance/recording operation continuously when the defined days of the week and set time of the set days are met. Motion is ignored with this method. Each recording time-span is in accordance with the set duration (in seconds) and the video record is stored in the SD card.
Wireless Cube Fish-Eye IP Camera ICA-W8100 ■ Trigger by PIR PIR On the defined days of the week and at certain time of the set days, the camera will trigger its PIR operation when it senses abrupt changes in temperature or detects motion. Recording duration can be set in seconds and the video record may be sent to host by e-mail or stored in the SD card. 4.7.3 Snapshot Tab The Snapshot tabbed pane sets the camera to take snapshot images when motion is detected.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Always Under this method, the camera automatically continuous to capture 6 snapshots of the area under surveillance at every 1 or 2 seconds interval. 3 previous snapshot frames are collected from the Camera buffer and 3 snapshot frames are captured live. The stream of accumulated snapshots may be sent to host by e-mail, FTP, or stored in the SD card as preferred.
Wireless Cube Fish-Eye IP Camera ICA-W8100 ■ Trigger by Motion Motion This method will trigger the camera snapshot operation according to the set time interval (in seconds) whenever motion is detected within the defined days of the week and at the time of the set days. Single or 6 snapshots may be captured as defined. The stream of accumulated snapshots may be sent to host by e-mail, FTP, or stored in the SD card as preferred.
Wireless Cube Fish-Eye IP Camera ICA-W8100 ■ Trigger to E-mail, FTP, SD card The stream of accumulated snapshots may be sent to host through e-mail, FTP, or stored in the SD card per selection or through all 3 available methods. When selected, the setup dialog for these methods will display as illustrated in the following figure. 1. As for the settings of SMTP service, kindly please contact your e-mail service provider.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.8 Local Storage Setup Execution Clicking the Local Storage button will display the following tabbed panes to provide information on existing local storage, such as disk size info, type, and status. If recording is in progress when clicking the Local Storage button, a warning message will occur. 4.8.1 Local Storage Tab Save Click this button to save changes to the SD card control setting.
Wireless Cube Fish-Eye IP Camera ICA-W8100 4.8.2 Playback Tab The Playback tabbed pane allows user to playback video and snapshot files stored in the SD memory card. These files were saved using the Event setup for video and snapshots with the SD card check box enabled. Playback of the stored videos or snapshots is performed from files recorded on particular date range as explained in the following figure. 4.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Appendix A: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm the installation of Internet camera, or if the IP address conflicts with any other device over the network.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Appendix B: DDNS Application Configure PLANET DDNS with the following steps: Step 1. Enable DDNS option through accessing web page of NAS Step 2. Select on DDNS server provided, and register an account if you have not used yet. Let’s take dyndns.org as an example. Register an account in http://planetddns.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Appendix C: Configuring Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be set up as fixed IP address, also the port forwarding or Virtual Server function of router needs to be set up. This device supports UPnP traversal function. Therefore, user could use this feature to configure port forwarding of NAT router first.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Your WAN IP Address will be listed here. 3. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the device are blocked from access over the Internet.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be accessed from WAN by the router’s WAN IP Address. By now, you have finished your entire PC configuration for this device.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Appendix D: Troubleshooting & Frequently Asked Questions Features The video and audio codec is adopted in the device. The device utilizes H.264 and M-JPEG triple compression to provide high quality images. Where H.264 is standard for video compression, M-JPEG is standard for image compression. The audio codec is defined as u-Law for RTSP streaming. The maximum number of users accessing device simultaneously. The maximum number of users is limited to 10.
Wireless Cube Fish-Eye IP Camera ICA-W8100 cannot find the device. z Do not connect device over a router. IPInstaller program cannot detect device over a router. z If IP address is not assigned to the PC which is running IPInstaller program, then the program cannot find device. Make sure that IP address is assigned to the PC properly. z Antivirus software on the PC might interfere with the setup program. Disable the firewall of the antivirus software during the setting up of this device.
Wireless Cube Fish-Eye IP Camera ICA-W8100 available via Internet. Check your ISP for available port. Image or video does not appear on the main page. How to check whether the device’s ActiveX is installed on your computer Internet Explorer displays the following message: “Your current security settings prohibit downloading ActiveX controls”. The device work locally but not externally. z The proxy server may prevent you from connecting directly to the Network camera.
Wireless Cube Fish-Eye IP Camera ICA-W8100 to be accessed outside your local LAN. Image Transfer on e-mail or FTP does not work. z Check the bandwidth of Internet connection. If the Internet bandwidth is lower than target bit rate, the video streaming will not work correctly. z Default Gateway and DNS server address should be set up correctly. z If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server.
Wireless Cube Fish-Eye IP Camera ICA-W8100 Appendix E: EC Declaration of Conformity English Hereby, PLANET Technology Corporation declares that this Wireless Cube Fish-Eye IP Camera is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Lietuviškai Šiuo PLANET Technology Corporation,, skelbia, kad Wireless Cube Fish-Eye IP Camera tenkina visus svarbiausius 1999/5/EC direktyvos reikalavimus ir kitas svarbias nuostatas.
